Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Rectangular desktop duplicator with seven top-loading M.2 slots and a front touchscreen

EZ Dupe, Inc.

EZ Dupe, Inc. SOHO NVMe MKII Duplicator 1-7 M.2 NVMe/SATA Touchscreen

SKU CH-4BX0-8TW57

Duplicates up to seven M.2 NVMe or SATA modules at 35 MB/s per slot with touchscreen control

  • TypeM.2 NVMe Duplicator
  • Target1 to 7
  • Supported MediaM.2 NVMe
  • Data Transfer Rate2GB/min
  • Operating TypeStandalone
  • ConnectorM.2 NVMe

Option Touchscreen

  • Copy seven drives simultaneously at up to 35 MB/s per slot
  • Touchscreen menu lets you copy, compare, erase or format with one tap
  • Handles 2230, 2242, 2260 and 2280 M.2 modules in B-Key, M-Key or B+M-Key
  • Supports both SATA and NVMe interfaces on every slot
  • Standalone operation — no host PC required for duplication tasks

Target users and purpose

The EZ Dupe SOHO NVMe MKII is a standalone duplicator that copies one M.2 NVMe or SATA source drive to as many as seven target drives at once. It is built for IT departments, data-recovery labs and small businesses that need to clone or sanitise M.2 modules without tying up a workstation.

Touchscreen menu and supported formats

A colour LCD touchscreen replaces physical buttons and provides one-touch access to copy, compare, erase and format commands. The controller handles NTFS, FAT16, FAT32 and Linux EXT2, EXT3 and EXT4 file systems for quick-copy operations, while bit-by-bit mode duplicates every sector regardless of file system.

Installation and common issues

The unit plugs into 115–230 V AC mains and requires no host computer or driver installation; drives are inserted vertically into the top-load slots. Errors typically occur when a source drive is larger than the targets, when a target is write-protected, or when mixed NVMe and SATA modules are used in the same job.

Erősségek

  • Copy seven drives simultaneously at up to 35 MB/s per slot
  • Touchscreen menu lets you copy, compare, erase or format with one tap
  • Handles 2230, 2242, 2260 and 2280 M.2 modules in B-Key, M-Key or B+M-Key
  • Supports both SATA and NVMe interfaces on every slot
  • Standalone operation — no host PC required for duplication tasks

Műszaki adatok

BrandEZ Dupe
ModelSOHO NVMe
Part NumberDM-HE0-8V07NTP2
TypeM.2 NVMe Duplicator
Target1 to 7
Supported MediaM.2 NVMe
Data Transfer Rate2GB/min
Operating TypeStandalone
ConnectorM.2 NVMe
Load TypeTop Load
Key FeaturesStandalone
FeaturesTouchscreen
Power SupplyAC: 115-230 V, 50/60 Hz

A modell további verziói

1 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

Will the touchscreen panel need replacement after heavy use?

The unit has no user-serviceable touchscreen parts; the panel is integrated into the chassis and covered by the 1-year manufacturer part-and-labour warranty.

What limits copy speed when all seven slots run continuously?

Each destination slot tops out at 35 MB/s independent bandwidth, so the per-slot ceiling appears before any shared bus bottleneck.

How much heat and fan noise should I expect during an all-day duplication run?

The duplicator draws 115–230 V AC at 50/60 Hz with no auxiliary cooling specs listed; only the internal power supply and drive thermals determine temperature and acoustic output.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.