Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular desktop duplicator with seven top-loading M.2 slots and a front touchscreen

EZ Dupe, Inc.

EZ Dupe, Inc. SOHO NVMe MKII Duplicator 1-7 M.2 NVMe/SATA Touchscreen

SKU CH-4BX0-8TW57

Duplicates up to seven M.2 NVMe or SATA modules at 35 MB/s per slot with touchscreen control

  • TypeM.2 NVMe Duplicator
  • Target1 to 7
  • Supported MediaM.2 NVMe
  • Data Transfer Rate2GB/min
  • Operating TypeStandalone
  • ConnectorM.2 NVMe

Option Touchscreen

  • Copy seven drives simultaneously at up to 35 MB/s per slot
  • Touchscreen menu lets you copy, compare, erase or format with one tap
  • Handles 2230, 2242, 2260 and 2280 M.2 modules in B-Key, M-Key or B+M-Key
  • Supports both SATA and NVMe interfaces on every slot
  • Standalone operation — no host PC required for duplication tasks

Target users and purpose

The EZ Dupe SOHO NVMe MKII is a standalone duplicator that copies one M.2 NVMe or SATA source drive to as many as seven target drives at once. It is built for IT departments, data-recovery labs and small businesses that need to clone or sanitise M.2 modules without tying up a workstation.

Touchscreen menu and supported formats

A colour LCD touchscreen replaces physical buttons and provides one-touch access to copy, compare, erase and format commands. The controller handles NTFS, FAT16, FAT32 and Linux EXT2, EXT3 and EXT4 file systems for quick-copy operations, while bit-by-bit mode duplicates every sector regardless of file system.

Installation and common issues

The unit plugs into 115–230 V AC mains and requires no host computer or driver installation; drives are inserted vertically into the top-load slots. Errors typically occur when a source drive is larger than the targets, when a target is write-protected, or when mixed NVMe and SATA modules are used in the same job.

Helstu kostir

  • Copy seven drives simultaneously at up to 35 MB/s per slot
  • Touchscreen menu lets you copy, compare, erase or format with one tap
  • Handles 2230, 2242, 2260 and 2280 M.2 modules in B-Key, M-Key or B+M-Key
  • Supports both SATA and NVMe interfaces on every slot
  • Standalone operation — no host PC required for duplication tasks

Tæknilýsing

BrandEZ Dupe
ModelSOHO NVMe
Part NumberDM-HE0-8V07NTP2
TypeM.2 NVMe Duplicator
Target1 to 7
Supported MediaM.2 NVMe
Data Transfer Rate2GB/min
Operating TypeStandalone
ConnectorM.2 NVMe
Load TypeTop Load
Key FeaturesStandalone
FeaturesTouchscreen
Power SupplyAC: 115-230 V, 50/60 Hz

Aðrar útgáfur af þessari vöru

1 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the touchscreen panel need replacement after heavy use?

The unit has no user-serviceable touchscreen parts; the panel is integrated into the chassis and covered by the 1-year manufacturer part-and-labour warranty.

What limits copy speed when all seven slots run continuously?

Each destination slot tops out at 35 MB/s independent bandwidth, so the per-slot ceiling appears before any shared bus bottleneck.

How much heat and fan noise should I expect during an all-day duplication run?

The duplicator draws 115–230 V AC at 50/60 Hz with no auxiliary cooling specs listed; only the internal power supply and drive thermals determine temperature and acoustic output.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.