GAMDIAS Technology ATHENA M4M WOOD 650W 80+ Gold PSU PC case
- ATX Mini Tower
- Black
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
GAMDIAS Technology
A compact micro-tower case with a real walnut wood front I/O panel, an included 850W 80+ Gold PSU, three 120mm NOTUS M1 fans, support for GPUs up to 395mm and dual 360mm radiators.
Model ATHENA M4M WOOD + 850W Gold PSU
Az áthúzott konfigurációk léteznek, de nem érhetők el itt.
The ATHENA M4M WOOD is a mini-tower chassis that ships with an 850W 80+ GOLD power supply pre-installed. It accepts Micro ATX motherboards and provides a distinctive real walnut wood front I/O panel. The design targets builders who want a compact system with high-end power delivery and a natural-material accent.
Three 120mm NOTUS M1 fans deliver up to 57.56 CFM of airflow through the perforated mesh front panel. An 8-port PWM ARGB hub is included for fan control and lighting synchronisation. The front-mounted PSU layout with downward-facing connectors and a shroud keeps cable routing tidy while maintaining clean internal airflow paths.
Graphics cards up to 395 mm in length fit without modification, and the interior accommodates two 360 mm radiators simultaneously. CPU coolers up to 175 mm tall are supported, while the PSU bay accepts units up to 150 mm deep. The case does not suit builders who need ATX or E-ATX motherboard compatibility or more than one 3.5-inch drive bay.
| Type | ATX Mini Tower |
|---|---|
| Color | Black |
| With Power Supply | Yes |
| Power Supply | 850W |
| Power Supply Mounted | Front |
| Motherboard Compatibility | Micro ATX |
| Dust Filters | Bottom |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 2 |
| Front Ports | USB 3.0 / Audio |
| Max GPU Length | 395 mm |
| Max CPU Cooler Height | 175 mm |
| Max PSU Length | 150 mm |
| Dimensions | 446 x 235 x 347mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Slide the PSU into the front chamber with its connectors facing downward, then route the included extension cable to the motherboard tray; the step most people forget is seating the PSU fully so the shroud aligns and the rear thumbscrews engage.
Remove the magnetic bottom filter every few months and rinse it; wipe the NOTUS M1 fan blades with a soft brush or compressed air to keep airflow near the rated 57.56 CFM.
The 175mm CPU-cooler clearance becomes the bottleneck — tall tower coolers cannot fit alongside a top 360mm radiator, forcing a switch to an AIO or low-profile air cooler.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?