Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Compact black mini-tower with walnut front I/O panel, mesh front, front-mounted 850W PSU, three 120mm fans

GAMDIAS Technology

GAMDIAS Technology ATHENA M4M WOOD PC case 850W 80+ GOLD PSU 395mm GPU 360mm radiator support

SKU CH-SCHR-56EHK

A compact micro-tower case with a real walnut wood front I/O panel, an included 850W 80+ Gold PSU, three 120mm NOTUS M1 fans, support for GPUs up to 395mm and dual 360mm radiators.

  • TypeATX Mini Tower
  • ColorBlack
  • With Power SupplyYes
  • Power Supply850W
  • Power Supply MountedFront
  • Motherboard CompatibilityMicro ATX

Model ATHENA M4M WOOD + 850W Gold PSU

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Real walnut front I/O panel adds natural warmth to the build
  • 850W 80+ Gold PSU included powers demanding components out of the box
  • Fits 395mm GPU and dual 360mm radiators for high-end cooling
  • Front-mounted PSU with downward ports simplifies cable routing
  • Three 120mm NOTUS M1 fans deliver 57.56 CFM airflow quietly

Compact Micro-Tower with Included PSU

The ATHENA M4M WOOD is a mini-tower chassis that ships with an 850W 80+ GOLD power supply pre-installed. It accepts Micro ATX motherboards and provides a distinctive real walnut wood front I/O panel. The design targets builders who want a compact system with high-end power delivery and a natural-material accent.

Thermals Noise and Power Draw

Three 120mm NOTUS M1 fans deliver up to 57.56 CFM of airflow through the perforated mesh front panel. An 8-port PWM ARGB hub is included for fan control and lighting synchronisation. The front-mounted PSU layout with downward-facing connectors and a shroud keeps cable routing tidy while maintaining clean internal airflow paths.

395mm GPU and Dual 360mm Radiator Support

Graphics cards up to 395 mm in length fit without modification, and the interior accommodates two 360 mm radiators simultaneously. CPU coolers up to 175 mm tall are supported, while the PSU bay accepts units up to 150 mm deep. The case does not suit builders who need ATX or E-ATX motherboard compatibility or more than one 3.5-inch drive bay.

Přednosti

  • Real walnut front I/O panel adds natural warmth to the build
  • 850W 80+ Gold PSU included powers demanding components out of the box
  • Fits 395mm GPU and dual 360mm radiators for high-end cooling
  • Front-mounted PSU with downward ports simplifies cable routing
  • Three 120mm NOTUS M1 fans deliver 57.56 CFM airflow quietly

Specifikace

TypeATX Mini Tower
ColorBlack
With Power SupplyYes
Power Supply850W
Power Supply MountedFront
Motherboard CompatibilityMicro ATX
Dust FiltersBottom
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays2
Front PortsUSB 3.0 / Audio
Max GPU Length395 mm
Max CPU Cooler Height175 mm
Max PSU Length150 mm
Dimensions446 x 235 x 347mm

Další verze tohoto modelu

Dalších 1 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I install the front-mounted 850W PSU, and what step do builders often miss?

Slide the PSU into the front chamber with its connectors facing downward, then route the included extension cable to the motherboard tray; the step most people forget is seating the PSU fully so the shroud aligns and the rear thumbscrews engage.

What maintenance will the three 120mm NOTUS M1 fans and bottom dust filter need later?

Remove the magnetic bottom filter every few months and rinse it; wipe the NOTUS M1 fan blades with a soft brush or compressed air to keep airflow near the rated 57.56 CFM.

What thermal limit appears first when a 395mm GPU and dual 360mm radiators run sustained loads?

The 175mm CPU-cooler clearance becomes the bottleneck — tall tower coolers cannot fit alongside a top 360mm radiator, forcing a switch to an AIO or low-profile air cooler.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.