Geometric Future Eskimo Pro 420mm liquid cooler Black GEO-EP-42B
- Liquid Cooling Syst…
- Intel® LGA 1700, AM…
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Geometric Future
360 mm AIO with three 120 mm ARGB Squama 2501 fans, 1.5 L/min K6 pump and 55.8 mm copper base for LGA 1700 and AM5
Model Eskimo Pro 360
Fan Size 3 Fan Slots / 120x25mm
Color White
The Geometric Future Eskimo Pro is a new all-in-one CPU cooler with a 360 mm radiator and three pre-installed 120 mm ARGB PWM fans. A copper cold plate measuring 55.8 by 55.8 mm sits above an integrated K6 pump rated at 1.5 L/min flow. The white finish and diffused ARGB lighting on the block and fans suit colour-coordinated builds.
This cooler fits current mainstream desktop sockets from both manufacturers. Systems that require a different mounting pattern or a smaller radiator will not be compatible. Users who prefer air cooling or need a thinner radiator for space-constrained cases should consider other form factors.
The radiator width determines case clearance and the fan count sets the maximum airflow potential. The bundled Squama 2501 ARGB fans are optimised for static pressure across the 360 mm core. Verify that your chassis supports a 360 mm mount before purchasing.
| Type | Liquid Cooling System |
|---|---|
| Block Compatibility | Intel® LGA 1700, AMD®AM5 |
| Block Material | Copper |
| Fan Size | 3 Fan Slots (120 mm) |
| Color | White |
| LED Color | ARGB |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The 360 mm radiator occupies three 120 mm fan slots, so the case must support a 360 mm top, front or rear mounting position with enough depth for the radiator plus 25 mm fan thickness and tubing clearance.
Use the included socket-specific bracket kit, apply thermal paste, place the copper base on the CPU, then secure the four thumb-screws in a cross pattern; the step often missed is removing the protective film from the copper base before installation.
Replace the fans if bearing noise appears, airflow drops noticeably, or ARGB lighting fails — typically after several years of continuous operation; the pump is rated for a 1.5 L/min flow rate and does not have a user-service interval.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?