Geometric Future Eskimo Pro 420mm liquid cooler Black GEO-EP-42B
- Liquid Cooling Syst…
- Intel® LGA 1700, AM…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Geometric Future
360 mm AIO with three 120 mm ARGB Squama 2501 fans, 1.5 L/min K6 pump and 55.8 mm copper base for LGA 1700 and AM5
Model Eskimo Pro 360
Fan Size 3 Fan Slots / 120x25mm
Color White
The Geometric Future Eskimo Pro is a new all-in-one CPU cooler with a 360 mm radiator and three pre-installed 120 mm ARGB PWM fans. A copper cold plate measuring 55.8 by 55.8 mm sits above an integrated K6 pump rated at 1.5 L/min flow. The white finish and diffused ARGB lighting on the block and fans suit colour-coordinated builds.
This cooler fits current mainstream desktop sockets from both manufacturers. Systems that require a different mounting pattern or a smaller radiator will not be compatible. Users who prefer air cooling or need a thinner radiator for space-constrained cases should consider other form factors.
The radiator width determines case clearance and the fan count sets the maximum airflow potential. The bundled Squama 2501 ARGB fans are optimised for static pressure across the 360 mm core. Verify that your chassis supports a 360 mm mount before purchasing.
| Type | Liquid Cooling System |
|---|---|
| Block Compatibility | Intel® LGA 1700, AMD®AM5 |
| Block Material | Copper |
| Fan Size | 3 Fan Slots (120 mm) |
| Color | White |
| LED Color | ARGB |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The 360 mm radiator occupies three 120 mm fan slots, so the case must support a 360 mm top, front or rear mounting position with enough depth for the radiator plus 25 mm fan thickness and tubing clearance.
Use the included socket-specific bracket kit, apply thermal paste, place the copper base on the CPU, then secure the four thumb-screws in a cross pattern; the step often missed is removing the protective film from the copper base before installation.
Replace the fans if bearing noise appears, airflow drops noticeably, or ARGB lighting fails — typically after several years of continuous operation; the pump is rated for a 1.5 L/min flow rate and does not have a user-service interval.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?