NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Goldshell
Scrypt ASIC miner delivering 3.4 Gh/s at 1800 W with built-in power supply and 529 J/Gh efficiency for Litecoin and Dogecoin
The Goldshell E-DG1M is a Scrypt algorithm ASIC miner delivering a hashrate of 3.4Gh/s with a power draw of 1800W. It targets Litecoin, Dogecoin and Bells mining in a compact integrated chassis that includes the power supply. The unit measures 443 by 360 by 135mm and weighs 16kg, making it suitable for home or small-farm deployment.
Verify that your electrical circuit can supply 110 to 240VAC through a 16A rated cable to match the included PSU requirements. Ensure the operating space stays within 0 to 35 degrees Celsius and relative humidity does not exceed 65 percent. Confirm you have a stable network connection for the dual-mode port and Wi-Fi link before powering the unit on.
The miner runs at a typical 1800W with an efficiency of 529J/Gh while its internal fans spin at 3600rpm to maintain temperature. Acoustic output is rated at 45dB under standard load, which is comparable to a quiet office environment. Power consumption stays within a five percent tolerance of the rated figure during steady-state hashing.
| Brand | goldshell |
|---|---|
| Series | ECHO Series |
| Model | E-DG1M |
| Type | Mining Machine/Miner |
| Crypto Algorithm | Scrypt |
| Compatible Currency | Dogecoin, Litecoin |
| Mining Hardware | ASIC |
| Hashrate | 3.4Gh/s |
| Power Supply | Included |
| Power Consumption | 1800W |
| Power Efficiency | 529J/Gh |
The unit has an integrated design with a built-in power supply included, so no separate PSU purchase is required.
The E-DG1M is specified at 3.4Gh/s with a ±5% tolerance; no other hashrate versions of this model are listed.
At the default 3.4Gh/s the miner draws about 1800W, giving the stated 529J/Gh efficiency under typical operating conditions.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?