NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Goldshell
Scrypt ASIC miner delivering 3.4 Gh/s at 1800 W with built-in power supply and 529 J/Gh efficiency for Litecoin and Dogecoin
The Goldshell E-DG1M is a Scrypt algorithm ASIC miner delivering a hashrate of 3.4Gh/s with a power draw of 1800W. It targets Litecoin, Dogecoin and Bells mining in a compact integrated chassis that includes the power supply. The unit measures 443 by 360 by 135mm and weighs 16kg, making it suitable for home or small-farm deployment.
Verify that your electrical circuit can supply 110 to 240VAC through a 16A rated cable to match the included PSU requirements. Ensure the operating space stays within 0 to 35 degrees Celsius and relative humidity does not exceed 65 percent. Confirm you have a stable network connection for the dual-mode port and Wi-Fi link before powering the unit on.
The miner runs at a typical 1800W with an efficiency of 529J/Gh while its internal fans spin at 3600rpm to maintain temperature. Acoustic output is rated at 45dB under standard load, which is comparable to a quiet office environment. Power consumption stays within a five percent tolerance of the rated figure during steady-state hashing.
| Brand | goldshell |
|---|---|
| Series | ECHO Series |
| Model | E-DG1M |
| Type | Mining Machine/Miner |
| Crypto Algorithm | Scrypt |
| Compatible Currency | Dogecoin, Litecoin |
| Mining Hardware | ASIC |
| Hashrate | 3.4Gh/s |
| Power Supply | Included |
| Power Consumption | 1800W |
| Power Efficiency | 529J/Gh |
The unit has an integrated design with a built-in power supply included, so no separate PSU purchase is required.
The E-DG1M is specified at 3.4Gh/s with a ±5% tolerance; no other hashrate versions of this model are listed.
At the default 3.4Gh/s the miner draws about 1800W, giving the stated 529J/Gh efficiency under typical operating conditions.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?