Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

HP

HP 637071-001-R 2.5" 200GB SATA II MLC enterprise SSD

SKU CH-J8GE-VCYMX MPN 637071-001-R

Refurbished 2.5" 200GB SATA enterprise SSD using MLC flash for write-intensive server workloads

  • Form Factor2.5"
  • Capacity200GB
  • Memory ComponentsMLC
  • InterfaceSATA II
  • 5-inch form factor fits standard server bays
  • 200 GB capacity stores critical enterprise data
  • MLC memory delivers consistent write endurance
  • SATA II interface integrates with legacy controllers
  • Refurbished condition offers cost-effective server storage

HP 200GB SATA Enterprise SSD

This HP enterprise SSD delivers 200GB of storage in a 2.5-inch form factor using MLC NAND flash memory. It connects via a SATA II interface and carries model number 637071-001-R. The drive is supplied in refurbished condition for server and storage array deployments.

Suitable for SATA II storage upgrades

This drive suits administrators replacing failed drives in existing SATA II bays or expanding capacity in compatible HP servers and arrays. It is not for systems that require a different physical connector or a higher capacity than 200GB. Buyers needing faster throughput should consider drives with a newer interface standard.

SATA II interface decides compatibility

The SATA II interface is the single specification that determines whether this drive fits the target system. Verify that the host controller and backplane support SATA II before purchase. The 2.5-inch form factor and MLC memory type are secondary to the interface match.

Erősségek

  • 5-inch form factor fits standard server bays
  • 200 GB capacity stores critical enterprise data
  • MLC memory delivers consistent write endurance
  • SATA II interface integrates with legacy controllers
  • Refurbished condition offers cost-effective server storage

Műszaki adatok

BrandHP
Model637071-001-R
Form Factor2.5"
Capacity200GB
Memory ComponentsMLC
InterfaceSATA II
Szállítási súly0.45 kg
Csomagméret254 × 203 × 127 mm

Kérdések a termékről

What limits write throughput once the SATA II interface is saturated?

The SATA II link caps sequential writes at 3 Gb/s, so sustained throughput cannot exceed the bus bandwidth regardless of the MLC NAND speed.

How much power does the 2.5 inch MLC drive draw under a full-day workload?

Enterprise SATA SSDs in the 2.5 inch form factor typically idle around 1 W and peak near 5 W during sustained writes, so heat output stays modest in a server bay.

Which drive caddy or backplane do I need to mount this 2.5 inch SATA SSD in my server?

Any standard 2.5 inch SATA hot-swap tray or fixed bay with a 7-pin data and 15-pin power connector will accept the 200 GB MLC drive.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.