HP
HP 637071-001-R 2.5" 200GB SATA II MLC enterprise SSD
Refurbished 2.5" 200GB SATA enterprise SSD using MLC flash for write-intensive server workloads
- Form Factor2.5"
- Capacity200GB
- Memory ComponentsMLC
- InterfaceSATA II
- 5-inch form factor fits standard server bays
- 200 GB capacity stores critical enterprise data
- MLC memory delivers consistent write endurance
- SATA II interface integrates with legacy controllers
- Refurbished condition offers cost-effective server storage
HP 200GB SATA Enterprise SSD
This HP enterprise SSD delivers 200GB of storage in a 2.5-inch form factor using MLC NAND flash memory. It connects via a SATA II interface and carries model number 637071-001-R. The drive is supplied in refurbished condition for server and storage array deployments.
Suitable for SATA II storage upgrades
This drive suits administrators replacing failed drives in existing SATA II bays or expanding capacity in compatible HP servers and arrays. It is not for systems that require a different physical connector or a higher capacity than 200GB. Buyers needing faster throughput should consider drives with a newer interface standard.
SATA II interface decides compatibility
The SATA II interface is the single specification that determines whether this drive fits the target system. Verify that the host controller and backplane support SATA II before purchase. The 2.5-inch form factor and MLC memory type are secondary to the interface match.
Punti di forza
- 5-inch form factor fits standard server bays
- 200 GB capacity stores critical enterprise data
- MLC memory delivers consistent write endurance
- SATA II interface integrates with legacy controllers
- Refurbished condition offers cost-effective server storage
Caratteristiche tecniche
| Brand | HP |
|---|---|
| Model | 637071-001-R |
| Form Factor | 2.5" |
| Capacity | 200GB |
| Memory Components | MLC |
| Interface | SATA II |
| Peso di spedizione | 0.45 kg |
| Dimensioni del pacco | 254 × 203 × 127 mm |
Domande su questo articolo
What limits write throughput once the SATA II interface is saturated?
The SATA II link caps sequential writes at 3 Gb/s, so sustained throughput cannot exceed the bus bandwidth regardless of the MLC NAND speed.
How much power does the 2.5 inch MLC drive draw under a full-day workload?
Enterprise SATA SSDs in the 2.5 inch form factor typically idle around 1 W and peak near 5 W during sustained writes, so heat output stays modest in a server bay.
Which drive caddy or backplane do I need to mount this 2.5 inch SATA SSD in my server?
Any standard 2.5 inch SATA hot-swap tray or fixed bay with a 7-pin data and 15-pin power connector will accept the 200 GB MLC drive.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.



