BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.0027736BTC
Raktáron
HPE Juniper Networking
HPE Juniper Networking CBL-PWR-10AC-STR-US 110 V AC 10 A 8.20 ft server power supply
Standard power cord rated 110 V AC, 10 A with an 8.20 ft length for Juniper M7i and M10i routers
- TypeStandard Power Cord
- 110 V AC rating matches Juniper M-Series router power needs
- 10 A current capacity supports standard router operation
- 20 ft cord length allows flexible rack placement
- Designed for Juniper M7i and M10i router compatibility
- New standard power cord from Juniper Networks
Juniper M-Series Router Power Cord
This 110 V AC power cord is rated for 10 A and measures 8.20 ft in length. It is manufactured by Juniper Networks as a standard replacement cable for compatible routing hardware. The cord carries part number CBL-PWR-10AC-STR-US and originates from the United States.
Suited for Juniper M7i and M10i router installations
Network engineers maintaining these specific M-Series chassis can use this cable for direct AC mains connection. Buyers who need a different voltage rating, a higher current capacity, or a longer reach should look at other options. This cord does not support routers outside the listed M-Series models.
110 V AC voltage rating determines compatibility
The cable is designed exclusively for 110 V AC supply environments. Confirm that the installation site provides this mains voltage before ordering. No other electrical specification in the data overrides this requirement.
Erősségek
- 110 V AC rating matches Juniper M-Series router power needs
- 10 A current capacity supports standard router operation
- 20 ft cord length allows flexible rack placement
- Designed for Juniper M7i and M10i router compatibility
- New standard power cord from Juniper Networks
Műszaki adatok
| Brand | Juniper |
|---|---|
| Type | Standard Power Cord |
| Szállítási súly | 2.31 kg |
| Csomagméret | 324 × 183 × 133 mm |
Kérdések a termékről
Will the 8.20 ft CBL-PWR-10AC-STR-US reach my M7i router if the PDU is at the bottom of the rack?
The cord is 8.20 ft long and rated 110 V AC at 10 A, so measure the rack height and PDU position to confirm reach.
How can I verify the cord is delivering power to my M10i after installation?
Check that the router powers on normally and shows no input-voltage alarms in the JunOS chassis environment output.
Does the CBL-PWR-10AC-STR-US ship with any extra connectors or must I source a plug separately?
The box contains only the standard power cord itself; no additional connectors or adapters are included.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
