Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black power cord with straight plug, 8.20 ft length

HPE Juniper Networking

HPE Juniper Networking CBL-PWR-10AC-STR-US 110 V AC 10 A 8.20 ft server power supply

SKU CH-D8JN-YSE2Q MPN CBL-PWR-10AC-STR-US

Standard power cord rated 110 V AC, 10 A with an 8.20 ft length for Juniper M7i and M10i routers

  • TypeStandard Power Cord
  • 110 V AC rating matches Juniper M-Series router power needs
  • 10 A current capacity supports standard router operation
  • 20 ft cord length allows flexible rack placement
  • Designed for Juniper M7i and M10i router compatibility
  • New standard power cord from Juniper Networks

Juniper M-Series Router Power Cord

This 110 V AC power cord is rated for 10 A and measures 8.20 ft in length. It is manufactured by Juniper Networks as a standard replacement cable for compatible routing hardware. The cord carries part number CBL-PWR-10AC-STR-US and originates from the United States.

Suited for Juniper M7i and M10i router installations

Network engineers maintaining these specific M-Series chassis can use this cable for direct AC mains connection. Buyers who need a different voltage rating, a higher current capacity, or a longer reach should look at other options. This cord does not support routers outside the listed M-Series models.

110 V AC voltage rating determines compatibility

The cable is designed exclusively for 110 V AC supply environments. Confirm that the installation site provides this mains voltage before ordering. No other electrical specification in the data overrides this requirement.

Puncte forte

  • 110 V AC rating matches Juniper M-Series router power needs
  • 10 A current capacity supports standard router operation
  • 20 ft cord length allows flexible rack placement
  • Designed for Juniper M7i and M10i router compatibility
  • New standard power cord from Juniper Networks

Specificații

BrandJuniper
TypeStandard Power Cord
Greutate la expediere2.31 kg
Dimensiunile coletului324 × 183 × 133 mm

Întrebări despre acest articol

Will the 8.20 ft CBL-PWR-10AC-STR-US reach my M7i router if the PDU is at the bottom of the rack?

The cord is 8.20 ft long and rated 110 V AC at 10 A, so measure the rack height and PDU position to confirm reach.

How can I verify the cord is delivering power to my M10i after installation?

Check that the router powers on normally and shows no input-voltage alarms in the JunOS chassis environment output.

Does the CBL-PWR-10AC-STR-US ship with any extra connectors or must I source a plug separately?

The box contains only the standard power cord itself; no additional connectors or adapters are included.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.