HPE ProLiant DL360 Gen10 rack server Dual Xeon 6148 2.40 GHz 256GB 30.72TB

Enterprise 1U Rack Server

The HPE ProLiant DL360 Gen10 is a 1U rack server built for enterprise workloads that need dense compute and storage. It ships with dual Xeon Gold 6148 processors, each offering 20 cores at 2.40 GHz with a 3.70 GHz turbo frequency. The system includes 256 GB of DDR4 memory across eight 32 GB modules running at 3200 MHz. Storage capacity reaches 30.72 TB via four 7.68 TB enterprise SATA SSDs, suited for virtualisation and database tasks.

Installation and Common Issues

The bundle arrives with memory and drives packaged separately, so installation of those components is required before deployment. The included rail kit simplifies rack mounting in standard cabinets. Hot-swappable redundant power supplies allow a failed unit to be replaced without shutting down the server. Care is needed when seating the DIMMs and SSD carriers to avoid bent pins or incomplete locking, which are the most frequent setup errors.

SATA Interface Limits

The four 2.5-inch SSDs connect through a SATA 6 Gb/s interface, which caps sequential throughput below the peak capability of the drives themselves. The P408i-a controller with 2 GB cache and Smart Storage Battery provides RAID acceleration but remains bound by the SATA link speed. Workloads demanding sustained throughput above this ceiling will hit a bottleneck at the storage interface rather than the processor or memory subsystem.