NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Kingston Technology Corp.
32 GB DDR4 server memory running at 3200 MHz with ECC, CL22 latency, 1.20 V operation and unbuffered 288-pin DIMM format
This 32 GB DDR4 module is built for servers that need error-correcting memory without registered buffering. It suits administrators expanding capacity in platforms that accept unbuffered ECC DIMMs at standard voltage.
The dual-rank 2Rx8 organisation runs at 3200 MHz with CL22 latency and 1.20 V, delivering steady throughput for long-running workloads. Intel XMP 2.0 support allows the BIOS to apply the rated profile automatically during extended sessions.
A bare 288-pin DIMM without a heat spreader keeps the profile low for dense chassis layouts. The unbuffered ECC design plugs directly into standard DDR4 server slots, simplifying installation and daily maintenance.
| Brand | Kingston |
|---|---|
| Model | KTD-PE432E/32G |
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Heat Spreader | No |
| Szállítási súly | 0.05 kg |
| Csomagméret | 155 × 43 × 8 mm |
The module operates at the standard DDR4 voltage of 1.20 V without a heat spreader, so thermal output stays within normal DDR4 limits for a dual-rank 32 GB DIMM under sustained load.
The module needs a DDR4 288-pin DIMM slot and the platform must enable ECC in the BIOS; XMP 2.0 support is optional and only required if you want the rated 3200 MHz profile applied automatically.
No — mixing ECC and non-ECC modules on the same channel disables error correction and can prevent the system from booting; all populated slots should use ECC unbuffered DDR4 at the same voltage.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?