NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Kingston Technology Corp.
32 GB DDR4 server memory running at 3200 MHz with ECC, CL22 latency, 1.20 V operation and unbuffered 288-pin DIMM format
This 32 GB DDR4 module is built for servers that need error-correcting memory without registered buffering. It suits administrators expanding capacity in platforms that accept unbuffered ECC DIMMs at standard voltage.
The dual-rank 2Rx8 organisation runs at 3200 MHz with CL22 latency and 1.20 V, delivering steady throughput for long-running workloads. Intel XMP 2.0 support allows the BIOS to apply the rated profile automatically during extended sessions.
A bare 288-pin DIMM without a heat spreader keeps the profile low for dense chassis layouts. The unbuffered ECC design plugs directly into standard DDR4 server slots, simplifying installation and daily maintenance.
| Brand | Kingston |
|---|---|
| Model | KTD-PE432E/32G |
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Heat Spreader | No |
| Lähetyspaino | 0.05 kg |
| Pakkauksen mitat | 155 × 43 × 8 mm |
The module operates at the standard DDR4 voltage of 1.20 V without a heat spreader, so thermal output stays within normal DDR4 limits for a dual-rank 32 GB DIMM under sustained load.
The module needs a DDR4 288-pin DIMM slot and the platform must enable ECC in the BIOS; XMP 2.0 support is optional and only required if you want the rated 3200 MHz profile applied automatically.
No — mixing ECC and non-ECC modules on the same channel disables error correction and can prevent the system from booting; all populated slots should use ECC unbuffered DDR4 at the same voltage.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?