NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Kingston Technology Corp.
4GB DDR3 ECC unbuffered server memory running at 1600 MHz with CL11 latency and 1.35V operation
This 4GB DDR3-1600 module delivers error-correcting code protection in an unbuffered 240-pin form factor. It operates at 1.35V with a CAS latency of CL11 and conforms to the PC3-12800 standard. The single stick is designed for server platforms that require ECC memory without registered signalling.
The module is validated for specific Supermicro systems including A+ 1042G-LTF and several 2022TG and H8QGL motherboard variants. Builders working with consumer desktop boards or platforms that demand registered DIMMs should look elsewhere. Systems requiring higher capacities per slot will also need a different part.
The 240-pin DDR3 interface combined with ECC unbuffered operation is the single specification that determines compatibility. Only motherboards wired for unbuffered ECC DDR3 at 1.35V can accept this module. Verify your platform supports this exact configuration before purchasing.
| Brand | Kingston |
|---|---|
| Model | KVR16LE11S8/4 |
| Capacity | 4GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Features | w/TS SR x4 |
| Szállítási súly | 0.02 kg |
| Csomagméret | 169 × 55 × 13 mm |
This module is a 240-pin DDR3 DIMM rated for 1600 MHz at 1.35V; it fits any server board with DDR3 slots that support that voltage and speed.
Unbuffered and registered ECC memory cannot be mixed in the same server; all DIMMs must use the same signal-processing type for the system to function.
Enter the BIOS or use a tool such as CPU-Z to confirm the memory reports 1600 MHz, CAS latency 11 and ECC active.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?