NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Kingston Technology Corp.
4GB DDR3 ECC unbuffered server memory running at 1600 MHz with CL11 latency and 1.35V operation
This 4GB DDR3-1600 module delivers error-correcting code protection in an unbuffered 240-pin form factor. It operates at 1.35V with a CAS latency of CL11 and conforms to the PC3-12800 standard. The single stick is designed for server platforms that require ECC memory without registered signalling.
The module is validated for specific Supermicro systems including A+ 1042G-LTF and several 2022TG and H8QGL motherboard variants. Builders working with consumer desktop boards or platforms that demand registered DIMMs should look elsewhere. Systems requiring higher capacities per slot will also need a different part.
The 240-pin DDR3 interface combined with ECC unbuffered operation is the single specification that determines compatibility. Only motherboards wired for unbuffered ECC DDR3 at 1.35V can accept this module. Verify your platform supports this exact configuration before purchasing.
| Brand | Kingston |
|---|---|
| Model | KVR16LE11S8/4 |
| Capacity | 4GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Features | w/TS SR x4 |
| Lähetyspaino | 0.02 kg |
| Pakkauksen mitat | 169 × 55 × 13 mm |
This module is a 240-pin DDR3 DIMM rated for 1600 MHz at 1.35V; it fits any server board with DDR3 slots that support that voltage and speed.
Unbuffered and registered ECC memory cannot be mixed in the same server; all DIMMs must use the same signal-processing type for the system to function.
Enter the BIOS or use a tool such as CPU-Z to confirm the memory reports 1600 MHz, CAS latency 11 and ECC active.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?