Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Spool of 2.85 mm smartABS filament, 0.75 kg

Lay Filaments

Lay Filaments smartABS 3.0mm 0.75kg 3d printers accessory

SKU CH-82J3-87NV1

ABS filament with 90% less warping on a cold bed, acetone-smoothable, 0.75 kg spool, 2.85 mm diameter, prints at 235 °C

  • Low warp risk with 90% fewer failures on cold beds
  • Stronger parts from enhanced inter-layer adhesion
  • Glossy finish possible by smoothing with acetone vapour
  • Prints at 235 °C for reliable extrusion
  • 75 kg spool of 2.85 mm diameter filament

Lay Filaments smartABS 3.0mm Filament

Lay Filaments smartABS is a 3.0 mm diameter ABS filament supplied on a 0.75 kg spool. It targets makers producing medium to large 3D prints who need a hard, tough material with reliable bed adhesion on unheated surfaces. The formulation reduces warping failures by 90% compared to standard ABS. Acetone smoothing is supported for post-processing.

Sustained Print Behaviour

The filament prints at 235 °C and maintains dimensional stability during long builds thanks to low warp characteristics on a cold bed. Enhanced inter-layer adhesion keeps layer bonds consistent across tall objects, reducing delamination risk during extended print sessions. Consistent extrusion is supported by the 2.85 mm filament diameter tolerance.

Cold Bed and Acetone Limits

Low warp performance is achieved without a heated bed, removing the need for bed temperature management on compatible printers. Acetone smoothing works on finished parts but requires ventilation and safe handling due to solvent properties. The material remains standard ABS chemically, so it shares ABS temperature resistance and UV sensitivity limits.

Erősségek

  • Low warp risk with 90% fewer failures on cold beds
  • Stronger parts from enhanced inter-layer adhesion
  • Glossy finish possible by smoothing with acetone vapour
  • Prints at 235 °C for reliable extrusion
  • 75 kg spool of 2.85 mm diameter filament

Műszaki adatok

BrandLay Filaments

Kérdések a termékről

Does the 2.85 mm smartABS filament need an actively heated chamber for long prints?

The material is formulated for low warp on a cold bed and 90 % less warping failure, so an actively heated chamber is not required for medium and large prints.

What nozzle temperature must my printer reach for this reel?

The supplier specifies a printing temperature of 235 °C, so the hot-end must be able to hold that temperature reliably.

Will the 0.75 kg spool fit a printer that takes 3.0 mm filament?

The filament diameter is 2.85 mm, which is the standard size sold as 3.0 mm class, so it will feed correctly on printers designed for that class.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.