저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Spool of 2.85 mm smartABS filament, 0.75 kg

Lay Filaments

Lay Filaments smartABS 3.0mm 0.75kg 3d printers accessory

SKU CH-82J3-87NV1

ABS filament with 90% less warping on a cold bed, acetone-smoothable, 0.75 kg spool, 2.85 mm diameter, prints at 235 °C

  • Low warp risk with 90% fewer failures on cold beds
  • Stronger parts from enhanced inter-layer adhesion
  • Glossy finish possible by smoothing with acetone vapour
  • Prints at 235 °C for reliable extrusion
  • 75 kg spool of 2.85 mm diameter filament

Lay Filaments smartABS 3.0mm Filament

Lay Filaments smartABS is a 3.0 mm diameter ABS filament supplied on a 0.75 kg spool. It targets makers producing medium to large 3D prints who need a hard, tough material with reliable bed adhesion on unheated surfaces. The formulation reduces warping failures by 90% compared to standard ABS. Acetone smoothing is supported for post-processing.

Sustained Print Behaviour

The filament prints at 235 °C and maintains dimensional stability during long builds thanks to low warp characteristics on a cold bed. Enhanced inter-layer adhesion keeps layer bonds consistent across tall objects, reducing delamination risk during extended print sessions. Consistent extrusion is supported by the 2.85 mm filament diameter tolerance.

Cold Bed and Acetone Limits

Low warp performance is achieved without a heated bed, removing the need for bed temperature management on compatible printers. Acetone smoothing works on finished parts but requires ventilation and safe handling due to solvent properties. The material remains standard ABS chemically, so it shares ABS temperature resistance and UV sensitivity limits.

주요 특징

  • Low warp risk with 90% fewer failures on cold beds
  • Stronger parts from enhanced inter-layer adhesion
  • Glossy finish possible by smoothing with acetone vapour
  • Prints at 235 °C for reliable extrusion
  • 75 kg spool of 2.85 mm diameter filament

사양

BrandLay Filaments

이 상품에 대한 질문

Does the 2.85 mm smartABS filament need an actively heated chamber for long prints?

The material is formulated for low warp on a cold bed and 90 % less warping failure, so an actively heated chamber is not required for medium and large prints.

What nozzle temperature must my printer reach for this reel?

The supplier specifies a printing temperature of 235 °C, so the hot-end must be able to hold that temperature reliably.

Will the 0.75 kg spool fit a printer that takes 3.0 mm filament?

The filament diameter is 2.85 mm, which is the standard size sold as 3.0 mm class, so it will feed correctly on printers designed for that class.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.