Lexar NM620 256GB M.2 2280 NVMe internal SSD
- Internal Solid Stat…
- Consumer
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Lexar
A 512GB M.2 2280 NVMe drive delivering 3300 MB/s read and 2400 MB/s write for faster system responsiveness
The Lexar NM620 is a 512GB internal SSD built for consumer desktops and laptops. It uses a PCIe Gen3x4 NVMe interface to deliver sequential reads up to 3300 MBps and writes up to 2400 MBps. Random performance reaches 200,000 read IOPS and 256,000 write IOPS. The drive targets PC enthusiasts and gamers who want faster load times than a SATA-based SSD.
The single-sided M.2 2280 module measures 80.00mm long, 22.00mm wide and 2.25mm high, weighing 9.00g. It draws up to 3497 mW during reads and 3196 mW during writes. With no moving parts it survives 1500G shock and vibration from 10 to 2000 Hz at 20G. Operating temperatures span 0°C to 70°C and storage temperatures span -40°C to 85°C.
The NM620 provides roughly six times the sequential throughput of a typical SATA SSD. A 250TB write endurance rating and 1,500,000-hour MTBF support heavy daily workloads. LDPC error correction protects data integrity on the 3D TLC NAND. The jump is worth it when boot drives or game libraries still sit on SATA or on an earlier Gen3 drive with lower IOPS.
| Brand | Lexar |
|---|---|
| Series | NM620 |
| Model | LNM620X512G-RNNNG |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 512GB |
| Memory Components | 3D TLC |
| Interface | PCIe Gen3x4 NVMe |
| Max Sequential Read | Up to 3300 MBps |
| Max Sequential Write | Up to 2400 MBps |
| 4KB Random Read | Up to 200,000 IOPS |
| 4KB Random Write | Up to 256,000 IOPS |
| MTBF | 1,500,000 hours |
| Features | TBW: 250TB High-speed PCIe Gen3x4 interface: 3300 MB/s read and 2400 MB/s write - NVMe 1.4 supported M.2 2280 form factor Get 6x the speed of a SATA-based SSD Ideal for PC enthusiasts and gamers 3D NAND Features LDPC (Low-Density Parity Check) Shock and vibration resistant with no moving parts |
| Power Consumption (Active) | Active write: 3196 mW Active read: 3497 mW (Maximum) |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Max Vibration Resistance | 10~2000 Hz, 1.5 mm, 20G, 1 Oct/min, 30 min/axis (X,Y,Z) |
| Height | 2.25mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 9.00g |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The interface supports up to 3300 MB/s sequential read and 2400 MB/s sequential write, with 200000 IOPS random read and 256000 IOPS random write.
It fits a standard M.2 2280 slot measuring 80.00 mm long, 22.00 mm wide and 2.25 mm high, weighing 9.00 g.
Insert the drive at an angle into the M.2 slot, press flat, and secure with the motherboard screw; many forget the screw and leave the drive unsecured.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?