Lexar NM620 256GB M.2 2280 NVMe internal SSD
- Internal Solid Stat…
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Lexar
A 512GB M.2 2280 NVMe drive delivering 3300 MB/s read and 2400 MB/s write for faster system responsiveness
The Lexar NM620 is a 512GB internal SSD built for consumer desktops and laptops. It uses a PCIe Gen3x4 NVMe interface to deliver sequential reads up to 3300 MBps and writes up to 2400 MBps. Random performance reaches 200,000 read IOPS and 256,000 write IOPS. The drive targets PC enthusiasts and gamers who want faster load times than a SATA-based SSD.
The single-sided M.2 2280 module measures 80.00mm long, 22.00mm wide and 2.25mm high, weighing 9.00g. It draws up to 3497 mW during reads and 3196 mW during writes. With no moving parts it survives 1500G shock and vibration from 10 to 2000 Hz at 20G. Operating temperatures span 0°C to 70°C and storage temperatures span -40°C to 85°C.
The NM620 provides roughly six times the sequential throughput of a typical SATA SSD. A 250TB write endurance rating and 1,500,000-hour MTBF support heavy daily workloads. LDPC error correction protects data integrity on the 3D TLC NAND. The jump is worth it when boot drives or game libraries still sit on SATA or on an earlier Gen3 drive with lower IOPS.
| Brand | Lexar |
|---|---|
| Series | NM620 |
| Model | LNM620X512G-RNNNG |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 512GB |
| Memory Components | 3D TLC |
| Interface | PCIe Gen3x4 NVMe |
| Max Sequential Read | Up to 3300 MBps |
| Max Sequential Write | Up to 2400 MBps |
| 4KB Random Read | Up to 200,000 IOPS |
| 4KB Random Write | Up to 256,000 IOPS |
| MTBF | 1,500,000 hours |
| Features | TBW: 250TB High-speed PCIe Gen3x4 interface: 3300 MB/s read and 2400 MB/s write - NVMe 1.4 supported M.2 2280 form factor Get 6x the speed of a SATA-based SSD Ideal for PC enthusiasts and gamers 3D NAND Features LDPC (Low-Density Parity Check) Shock and vibration resistant with no moving parts |
| Power Consumption (Active) | Active write: 3196 mW Active read: 3497 mW (Maximum) |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Max Vibration Resistance | 10~2000 Hz, 1.5 mm, 20G, 1 Oct/min, 30 min/axis (X,Y,Z) |
| Height | 2.25mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 9.00g |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The interface supports up to 3300 MB/s sequential read and 2400 MB/s sequential write, with 200000 IOPS random read and 256000 IOPS random write.
It fits a standard M.2 2280 slot measuring 80.00 mm long, 22.00 mm wide and 2.25 mm high, weighing 9.00 g.
Insert the drive at an angle into the M.2 slot, press flat, and secure with the motherboard screw; many forget the screw and leave the drive unsecured.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?