Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

LORDWORLD

LORDWORLD 2.5 SATA M.2 to USB 3.2 Gen 1 Adapter

SKU CH-1W4C-7BCV7

Connects a 2.5 SATA drive or SATA M.2 SSD to USB 3.2 Gen 1 at 5Gbps with an activity LED and power switch

  • Transfer speeds up to 5Gbps with USB 3.2 Gen 1
  • Works with 2.5 SATA HDD or SSD and SATA M.2 SSD
  • Backward compatible with USB 2.0 for older ports
  • Blue LED shows drive activity at a glance
  • Large power switch turns the drive on or off

Single-Drive SATA Adapter

The LORDWORLD adapter connects one 2.5-inch SATA HDD or SSD, or one SATA M.2 SSD, to a USB 3.2 Gen 1 port. It does not support using both drive types at the same time. The device suits technicians and hobbyists who need quick external access to a single SATA drive for cloning, recovery or data transfer.

Passive Cooling and Low Power

No fan is fitted; the aluminium body acts as a passive heatsink for the drive during normal use. Operation is silent, and power draw is limited to what the USB 3.2 Gen 1 port can supply, with backward compatibility to USB 2.0. A large on/off switch lets you cut power to the drive without unplugging the cable.

LED Status and Simple Setup

A cool blue LED indicates drive activity so you can see read or write operations at a glance. No drivers or bundled software are required on modern operating systems; the adapter appears as a standard mass-storage device. The package includes only the adapter and a USB cable, keeping the setup minimal.

Erősségek

  • Transfer speeds up to 5Gbps with USB 3.2 Gen 1
  • Works with 2.5 SATA HDD or SSD and SATA M.2 SSD
  • Backward compatible with USB 2.0 for older ports
  • Blue LED shows drive activity at a glance
  • Large power switch turns the drive on or off

Műszaki adatok

BrandLORDWORLD

Kérdések a termékről

How do I connect a 2.5 SATA drive and a SATA M.2 SSD to this adapter?

Insert either one 2.5 SATA HDD or SSD or one SATA M.2 SSD into the corresponding slot; the adapter does not support using both drives at the same time.

What maintenance will this adapter need over time?

No routine maintenance is required; keep the USB 3.2 Gen 1 connector and drive slots free of dust and ensure the on/off power switch operates cleanly.

What limits transfer speed during sustained use?

The USB 3.2 Gen 1 interface caps throughput at 5 Gbps, so sustained reads and writes cannot exceed that bandwidth.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.