Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Compact black adapter with M.2 and 2.5 SATA slots, USB cable, blue LED, power switch

LORDWORLD

LORDWORLD 2.5 SATA M.2 to USB 3.2 Gen 1 Adapter

SKU CH-1W4C-7BCV7

Connects a 2.5 SATA drive or SATA M.2 SSD to USB 3.2 Gen 1 at 5Gbps with an activity LED and power switch

  • Transfer speeds up to 5Gbps with USB 3.2 Gen 1
  • Works with 2.5 SATA HDD or SSD and SATA M.2 SSD
  • Backward compatible with USB 2.0 for older ports
  • Blue LED shows drive activity at a glance
  • Large power switch turns the drive on or off

Single-Drive SATA Adapter

The LORDWORLD adapter connects one 2.5-inch SATA HDD or SSD, or one SATA M.2 SSD, to a USB 3.2 Gen 1 port. It does not support using both drive types at the same time. The device suits technicians and hobbyists who need quick external access to a single SATA drive for cloning, recovery or data transfer.

Passive Cooling and Low Power

No fan is fitted; the aluminium body acts as a passive heatsink for the drive during normal use. Operation is silent, and power draw is limited to what the USB 3.2 Gen 1 port can supply, with backward compatibility to USB 2.0. A large on/off switch lets you cut power to the drive without unplugging the cable.

LED Status and Simple Setup

A cool blue LED indicates drive activity so you can see read or write operations at a glance. No drivers or bundled software are required on modern operating systems; the adapter appears as a standard mass-storage device. The package includes only the adapter and a USB cable, keeping the setup minimal.

I korthet

  • Transfer speeds up to 5Gbps with USB 3.2 Gen 1
  • Works with 2.5 SATA HDD or SSD and SATA M.2 SSD
  • Backward compatible with USB 2.0 for older ports
  • Blue LED shows drive activity at a glance
  • Large power switch turns the drive on or off

Specifikationer

BrandLORDWORLD

Frågor om den här produkten

How do I connect a 2.5 SATA drive and a SATA M.2 SSD to this adapter?

Insert either one 2.5 SATA HDD or SSD or one SATA M.2 SSD into the corresponding slot; the adapter does not support using both drives at the same time.

What maintenance will this adapter need over time?

No routine maintenance is required; keep the USB 3.2 Gen 1 connector and drive slots free of dust and ensure the on/off power switch operates cleanly.

What limits transfer speed during sustained use?

The USB 3.2 Gen 1 interface caps throughput at 5 Gbps, so sustained reads and writes cannot exceed that bandwidth.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.