Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Small green circuit board with USB-C port, pin headers, jumper block and three LEDs

LORDWORLD

LORDWORLD FT232 USB UART TTL Converter Type C development board

SKU CH-752E-S5K3X

USB-C serial converter board with original FT232RL chip, selectable 3.3 V or 5 V logic via jumper, and TXD, RXD, RTS, CTS pin headers

  • Original FT232RL chip ensures reliable serial conversion
  • USB Type-C connector fits modern hosts without adapters
  • Three VCCIO jumper modes give 5 V, 3.3 V or target-board power
  • TXD, RXD, RTS, CTS pins on headers plus extra holes for prototyping
  • Works with Mac OS, Linux, Android, WinCE and Windows 7 through 11

FT232 USB UART TTL Converter Type C Board

This development board provides a USB Type-C to serial UART interface using the original FT232RL chip. It targets makers and engineers who need reliable serial communication with microcontrollers or embedded modules. The board operates at selectable 3.3 V or 5 V logic levels controlled by a jumper. Three onboard LEDs indicate power, TX and RX activity.

Suitable for cross-platform serial debugging

Engineers who require hardware flow control will appreciate the accessible RTS and CTS pins on the header. Developers needing higher baud rates or multi-channel UART should consider other solutions. The single-channel FT232RL does not support parallel or SPI interfaces. Buyers wanting isolated or industrial-grade voltage translation should look elsewhere.

Jumper-selectable 3.3 V or 5 V VCCIO logic level

The VCCIO jumper offers three modes: fixed 5 V output, fixed 3.3 V output, or power taken directly from the target board between 3.3 V and 5 V. This flexibility decides whether the board matches the voltage domain of the connected device. Incorrect jumper placement can damage 3.3 V only peripherals.

Erősségek

  • Original FT232RL chip ensures reliable serial conversion
  • USB Type-C connector fits modern hosts without adapters
  • Three VCCIO jumper modes give 5 V, 3.3 V or target-board power
  • TXD, RXD, RTS, CTS pins on headers plus extra holes for prototyping
  • Works with Mac OS, Linux, Android, WinCE and Windows 7 through 11

Műszaki adatok

BrandLORDWORLD

Kérdések a termékről

Should I set the jumper to 3.3 V or 5 V for my target board?

Use the 3.3 V position when your board runs at 3.3 V, the 5 V position for 5 V logic, or remove the jumper entirely to let the target board supply its own 3.3 V–5 V rail.

What does the FT232RL chip actually do once the board is plugged in?

It enumerates as a virtual COM port on Windows 7 through 11, Mac OS, Linux, Android or WinCE and translates USB traffic into 3.3 V or 5 V asynchronous serial with TXD, RXD, RTS# and CTS# signals.

Does the USB Type C connector limit the baud rate compared to older USB A versions?

The connector itself imposes no baud-rate ceiling; the FT232RL handles the same signalling rates regardless of the physical USB plug shape.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.