Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Small green circuit board with USB-C port, pin headers, jumper block and three LEDs

LORDWORLD

LORDWORLD FT232 USB UART TTL Converter Type C development board

SKU CH-752E-S5K3X

USB-C serial converter board with original FT232RL chip, selectable 3.3 V or 5 V logic via jumper, and TXD, RXD, RTS, CTS pin headers

  • Original FT232RL chip ensures reliable serial conversion
  • USB Type-C connector fits modern hosts without adapters
  • Three VCCIO jumper modes give 5 V, 3.3 V or target-board power
  • TXD, RXD, RTS, CTS pins on headers plus extra holes for prototyping
  • Works with Mac OS, Linux, Android, WinCE and Windows 7 through 11

FT232 USB UART TTL Converter Type C Board

This development board provides a USB Type-C to serial UART interface using the original FT232RL chip. It targets makers and engineers who need reliable serial communication with microcontrollers or embedded modules. The board operates at selectable 3.3 V or 5 V logic levels controlled by a jumper. Three onboard LEDs indicate power, TX and RX activity.

Suitable for cross-platform serial debugging

Engineers who require hardware flow control will appreciate the accessible RTS and CTS pins on the header. Developers needing higher baud rates or multi-channel UART should consider other solutions. The single-channel FT232RL does not support parallel or SPI interfaces. Buyers wanting isolated or industrial-grade voltage translation should look elsewhere.

Jumper-selectable 3.3 V or 5 V VCCIO logic level

The VCCIO jumper offers three modes: fixed 5 V output, fixed 3.3 V output, or power taken directly from the target board between 3.3 V and 5 V. This flexibility decides whether the board matches the voltage domain of the connected device. Incorrect jumper placement can damage 3.3 V only peripherals.

Points forts

  • Original FT232RL chip ensures reliable serial conversion
  • USB Type-C connector fits modern hosts without adapters
  • Three VCCIO jumper modes give 5 V, 3.3 V or target-board power
  • TXD, RXD, RTS, CTS pins on headers plus extra holes for prototyping
  • Works with Mac OS, Linux, Android, WinCE and Windows 7 through 11

Caractéristiques

BrandLORDWORLD

Questions sur cet article

Should I set the jumper to 3.3 V or 5 V for my target board?

Use the 3.3 V position when your board runs at 3.3 V, the 5 V position for 5 V logic, or remove the jumper entirely to let the target board supply its own 3.3 V–5 V rail.

What does the FT232RL chip actually do once the board is plugged in?

It enumerates as a virtual COM port on Windows 7 through 11, Mac OS, Linux, Android or WinCE and translates USB traffic into 3.3 V or 5 V asynchronous serial with TXD, RXD, RTS# and CTS# signals.

Does the USB Type C connector limit the baud rate compared to older USB A versions?

The connector itself imposes no baud-rate ceiling; the FT232RL handles the same signalling rates regardless of the physical USB plug shape.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.