Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Small cylindrical encoder, 38 mm metal body, stainless spindle, 2 m cable

myVolts

myVolts E6B2-CWZ6C Incremental Encoder 38 mm 1200 P/R

SKU CH-GYSN-DFXZZ MPN E6B2-CWZ6C

38 mm incremental encoder delivering 1200 pulses per revolution with DC5–26 V supply, multiple output modes and built-in short-circuit plus reverse-wiring protection

  • TypeAT
  • Precise positioning with 1200 pulses per revolution
  • Reliable operation via internal ASIC anti-interference design
  • Durable stainless steel spindle resists impact and wear
  • Flexible integration with DC 5 to 26 V supply range
  • Protected against short circuits and reverse wiring faults

38 mm Incremental Encoder

The myVolts E6B2-CWZ6C is a 38 mm diameter incremental encoder built for industrial motion-control systems. It delivers 1200 pulses per revolution with selectable resolutions from 100 to 5000 P/R. The alloy shell and stainless steel spindle resist shock and vibration. An internal ASIC provides strong anti-interference performance across a DC 5 V to 26 V supply range.

Suits precision positioning, not high-speed counting

Engineers needing accurate shaft feedback for servo loops, CNC axes or robotics will find the 1200 P/R resolution and multiple output modes useful. The 30 N radial and 20 N axial load ratings cover typical light-duty couplings. Buyers who require hollow-shaft mounting, absolute positioning data or resolutions above 5000 P/R should look at alternative encoder types.

1200 P/R resolution decides fit

The fixed 1200 pulses per revolution determines the smallest angular step the control system can resolve. If the application demands finer granularity, a higher P/R variant from the optional range must be specified. If coarser feedback is acceptable, lower P/R models reduce controller bandwidth requirements.

Erősségek

  • Precise positioning with 1200 pulses per revolution
  • Reliable operation via internal ASIC anti-interference design
  • Durable stainless steel spindle resists impact and wear
  • Flexible integration with DC 5 to 26 V supply range
  • Protected against short circuits and reverse wiring faults

Műszaki adatok

TypeAT

Kérdések a termékről

Does the E6B2-CWZ6C run hot or draw much power during continuous 24-hour operation at 1200 P/R?

The encoder accepts DC 5 to 26 V open-collector supply and includes short-circuit and reverse-wiring protection; no thermal or continuous-draw figures are published.

What must I already have to install and power the 38 mm E6B2-CWZ6C encoder?

You need a DC 5–26 V power source, a 6 mm shaft coupling or mount, and a controller able to read A, B, Z phase signals in voltage, collector, complementary, push-pull, line-driver, differential or fork output modes.

Will the 2 m cable and 6 mm shaft of the E6B2-CWZ6C connect directly to my existing Omron PLC high-speed counter module?

The brown, blue and black leads provide DC 5–26 V, 0 V and signal outputs respectively; match the PLC input wiring to the chosen output mode and verify the 30 N radial and 20 N axial load limits suit your mechanical setup.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.