Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

myVolts

myVolts LPV-150-12 150W DC12V IP67 power supply

SKU CH-FSV2-X1W8S MPN LPV-150-12

IP67-rated 150W DC12V switching supply with aluminium housing, 12.5A output and automatic overload, overvoltage and overtemperature protection

  • TypeAT
  • IP67 rating protects against dust and water for outdoor installation
  • 150 W at 12 V delivers up to 12.5 A for LED strips and industrial gear
  • 81 % efficiency reduces heat and lowers running cost
  • Aluminium alloy housing dissipates heat for stable operation from -10 °C to 60 °C
  • Hiccup-mode protection auto-recovers after short-circuit, overload or over-voltage events

Outdoor-ready 150 W 12 V supply

The myVolts LPV-150-12 is a switching power supply rated at 150 W with a DC 12 V output. Its IP67-rated aluminium-alloy case makes it suitable for outdoor LED lighting, industrial control and similar installations that must withstand moisture and dust.

12.5 A continuous headroom

The unit delivers 0–12.5 A at 12 V, giving 150 W of usable power for LED strips, bulbs or instrumentation. Overload protection engages between 115 % and 135 % of rated output and cuts power automatically; once the fault is removed the supply recovers without manual intervention.

Fanless IP67 thermal design

With no moving parts the supply relies on its aluminium housing to dissipate heat across a working range of -10 °C to +60 °C at 20–90 % RH. Efficiency is 81 %, so waste heat stays modest, and the sealed IP67 enclosure keeps noise at zero while maintaining protection against water ingress.

Erősségek

  • IP67 rating protects against dust and water for outdoor installation
  • 150 W at 12 V delivers up to 12.5 A for LED strips and industrial gear
  • 81 % efficiency reduces heat and lowers running cost
  • Aluminium alloy housing dissipates heat for stable operation from -10 °C to 60 °C
  • Hiccup-mode protection auto-recovers after short-circuit, overload or over-voltage events

Műszaki adatok

TypeAT

Kérdések a termékről

Will the LPV-150-12 fit alongside older LED strips that run on 12 V and draw up to 12.5 A?

Yes — the unit delivers DC12V at 0-12.5 A, so existing 12 V strips within that current range will operate normally.

How can I confirm the LPV-150-12 is working correctly once installed?

Measure the output with a multimeter; a steady 12 V reading under load and the LED indicator lit show the supply is operating within its 81 % efficiency spec.

What comes in the box with the LPV-150-12 and what must I source separately?

The package contains the IP67-rated aluminium-alloy supply (245 x 70 x 48 mm); you must provide AC input wiring for 180-264 V and the DC output cables for your LED load.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.