Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

myVolts

myVolts LPV-150-12 150W DC12V IP67 power supply

SKU CH-FSV2-X1W8S MPN LPV-150-12

IP67-rated 150W DC12V switching supply with aluminium housing, 12.5A output and automatic overload, overvoltage and overtemperature protection

  • TypeAT
  • IP67 rating protects against dust and water for outdoor installation
  • 150 W at 12 V delivers up to 12.5 A for LED strips and industrial gear
  • 81 % efficiency reduces heat and lowers running cost
  • Aluminium alloy housing dissipates heat for stable operation from -10 °C to 60 °C
  • Hiccup-mode protection auto-recovers after short-circuit, overload or over-voltage events

Outdoor-ready 150 W 12 V supply

The myVolts LPV-150-12 is a switching power supply rated at 150 W with a DC 12 V output. Its IP67-rated aluminium-alloy case makes it suitable for outdoor LED lighting, industrial control and similar installations that must withstand moisture and dust.

12.5 A continuous headroom

The unit delivers 0–12.5 A at 12 V, giving 150 W of usable power for LED strips, bulbs or instrumentation. Overload protection engages between 115 % and 135 % of rated output and cuts power automatically; once the fault is removed the supply recovers without manual intervention.

Fanless IP67 thermal design

With no moving parts the supply relies on its aluminium housing to dissipate heat across a working range of -10 °C to +60 °C at 20–90 % RH. Efficiency is 81 %, so waste heat stays modest, and the sealed IP67 enclosure keeps noise at zero while maintaining protection against water ingress.

Fordele

  • IP67 rating protects against dust and water for outdoor installation
  • 150 W at 12 V delivers up to 12.5 A for LED strips and industrial gear
  • 81 % efficiency reduces heat and lowers running cost
  • Aluminium alloy housing dissipates heat for stable operation from -10 °C to 60 °C
  • Hiccup-mode protection auto-recovers after short-circuit, overload or over-voltage events

Specifikationer

TypeAT

Spørgsmål om denne vare

Will the LPV-150-12 fit alongside older LED strips that run on 12 V and draw up to 12.5 A?

Yes — the unit delivers DC12V at 0-12.5 A, so existing 12 V strips within that current range will operate normally.

How can I confirm the LPV-150-12 is working correctly once installed?

Measure the output with a multimeter; a steady 12 V reading under load and the LED indicator lit show the supply is operating within its 81 % efficiency spec.

What comes in the box with the LPV-150-12 and what must I source separately?

The package contains the IP67-rated aluminium-alloy supply (245 x 70 x 48 mm); you must provide AC input wiring for 180-264 V and the DC output cables for your LED load.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.