NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 1.5TB 12x128GB 6400MHz CL52 1.1V 2Rx4 288-Pin Supermicro H14SST-GE
1.5 TB DDR5 ECC registered kit of twelve 128 GB modules running at 6400 MHz CL52 1.1 V for Supermicro H14SST-GE
- Capacity1.5TB (12 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 5TB total capacity across 12 modules of 128GB each
- DDR5 6400 speed with CL52 latency at 1.1V for rated performance
- Registered ECC design corrects single-bit errors while buffering the memory controller
- 2Rx4 rank configuration matches the Supermicro H14SST-GE motherboard requirements
- 288-pin RDIMM form factor ensures exact fit in the server memory slots
1.5 TB DDR5 ECC RDIMM kit for Supermicro H14SST-GE
This kit delivers 1.5 TB of DDR5 registered ECC memory across twelve 128 GB modules. It is built for the Supermicro H14SST-GE motherboard and matches the exact rank, voltage and timing the board expects. Each module is a 288-pin RDIMM rated at DDR5-6400 with CL52 latency at 1.1 V.
DDR5 RDIMM population limits on this motherboard
The board uses 288-pin registered DIMM slots and requires registered modules, not unbuffered or SODIMM form factors. Full 1.5 TB capacity is only reachable when all twelve slots are populated with 2Rx4 modules at the rated speed. Memory population order and maximum supported capacity per slot must be confirmed in the motherboard manual before installation.
Upgrade from smaller or slower DDR5 RDIMM sets
Replacing a partial kit or lower-capacity modules with this twelve-module kit enables the full 1.5 TB ceiling the platform allows. The jump is worthwhile when workloads need every available slot filled at DDR5-6400 with registered ECC stability. Buyers who cannot populate all twelve slots or who need unbuffered memory should look elsewhere.
Fordele
- 5TB total capacity across 12 modules of 128GB each
- DDR5 6400 speed with CL52 latency at 1.1V for rated performance
- Registered ECC design corrects single-bit errors while buffering the memory controller
- 2Rx4 rank configuration matches the Supermicro H14SST-GE motherboard requirements
- 288-pin RDIMM form factor ensures exact fit in the server memory slots
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K12 |
| Capacity | 1.5TB (12 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.5TB 12X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Spørgsmål om denne vare
Should I choose the 1.5TB kit with twelve 128GB modules or a smaller capacity for the Supermicro H14SST-GE?
The 1.5TB kit provides twelve 128GB DDR5-6400 registered ECC modules that match the board's population rules for full-capacity operation.
What does the DDR5-6400 speed rating deliver once the modules are installed in the server?
The kit runs at 6400 MT/s with CL52 latency at 1.1V, giving the memory controller the exact timing and voltage it expects for stable full-speed operation.
How does the 288-pin registered ECC interface affect maximum capacity and error handling in this system?
The registered DDR5 RDIMM interface offloads the memory controller so all twelve slots can run fully populated, while ECC corrects single-bit errors on the fly.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 US$
0.00133375BTC
På lager
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 US$
0.0001015BTC
På lager