Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Rectangular metal-cased power supply 213 by 112 by 50 mm with built-in fan and voltage selector switch

myVolts

myVolts S-360-24 24V 15A 360W power supply

SKU CH-C7JE-V2AX1 MPN S-360-24

24V 15A regulated switch-mode supply delivering 360W with 85% efficiency, manual 110/220V input selection and short-circuit, overload and over-voltage protection in a metal case

  • TypeAT
  • Delivers 360 W at 24 V and 15 A for demanding 3D printers and automation gear
  • Operates on 100–260 V input with a manual 110 V/220 V selector switch before power-on
  • Built-in overload, over-voltage and short-circuit protection guards connected equipment
  • Metal case with temperature-controlled fan runs from 10 to 60 °C for quiet, reliable cooling
  • Compact 213×112×50 mm footprint weighs only 765 g for easy indoor installation

360W 24V Industrial Switching Supply

This 360W switching power supply delivers a regulated 24V output at 15A for 3D printers, LED displays, automation gear and computer projects. A metal case houses the full-bridge circuit with pulse-width modulation and a temperature-controlled fan. Manual 110V/220V selection covers 100–260V mains input. Efficiency reaches 85%.

Suits fixed indoor 24V DC loads up to 360W

Makers, integrators and technicians powering 3D printers, industrial sensors or LED strips from a bench or cabinet will find the voltage and protection set a match. Builders needing adjustable voltage, multiple rails, ATX connectors or outdoor-rated enclosures should look elsewhere. The unit is indoor-only and provides a single fixed rail.

24V 15A single-rail output decides fit

The supply delivers exactly 24V at up to 15A on one DC rail, so the project must accept that fixed voltage and current ceiling. Over-voltage, overload and short-circuit protection guard the load, but no other voltage or connector options exist. Confirm the 24V 15A requirement before ordering.

Erősségek

  • Delivers 360 W at 24 V and 15 A for demanding 3D printers and automation gear
  • Operates on 100–260 V input with a manual 110 V/220 V selector switch before power-on
  • Built-in overload, over-voltage and short-circuit protection guards connected equipment
  • Metal case with temperature-controlled fan runs from 10 to 60 °C for quiet, reliable cooling
  • Compact 213×112×50 mm footprint weighs only 765 g for easy indoor installation

Műszaki adatok

TypeAT

Kérdések a termékről

How do I install the S-360-24 and which step is most often missed?

Mount the 213 by 112 by 50 mm metal case indoors, then set the manual 110/220 V selector to match your mains before applying power; skipping the voltage check risks immediate damage.

What maintenance or replacement will this unit need later?

The built-in fan runs automatically based on temperature; plan to clean dust from the vents periodically and replace the fan if it becomes noisy or stops spinning.

What limit appears first during sustained high-load use?

The 10 to 60 °C operating range caps continuous output; above 60 °C the protection circuits will shut the 360 W unit down until it cools.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.