Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Two green DDR4 RDIMM sticks, no heat spreaders, 288 pins

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR4 3200 ECC RDIMM CL22 2Rx4 1.2V 288-Pin MSI WRX80 memory upgrade

SKU CH-WGZT-S4QT7

A 128 GB DDR4-3200 ECC registered dual-rank kit built for MSI WRX80 workstations

  • Capacity128GB (2 x 64GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 128GB 2X64GB

Még 4 konfiguráció megtekintése
  • 128GB total capacity with two 64GB modules for high-density workloads
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • DDR4 3200 speed rated at PC4-25600 for fast throughput on compatible systems
  • CL22 latency at 1.2V delivers stable operation within standard power limits
  • Validated for MSI WRX80 motherboards to ensure reliable compatibility

128GB DDR4 ECC RDIMM kit for MSI WRX80

This 128GB kit provides two 64GB DDR4 3200 registered DIMMs with ECC and a CAS latency of 22. It is built for the MSI WS WRX80 motherboard and operates at 1.2V. The modules use major OEM chips from Samsung, Micron or Hynix and carry part number MR25600-924K2.

Sustained load stability with registered ECC

Registered buffering reduces electrical load on the memory controller during continuous operation. ECC detects and corrects single-bit errors to maintain data integrity under prolonged workloads. The CL22 timing at 3200 MT/s delivers consistent throughput for server and workstation tasks. Stress testing under load is performed before shipment.

DDR4 288-pin RDIMM interface limits

The 288-pin DDR4 RDIMM form factor fits only DDR4 registered DIMM slots. Maximum speed is PC4-25600 (3200 MT/s) at 1.2V with 2Rx4 organisation. Systems must support registered ECC modules and the WRX80 platform to use this capacity. Mixing with unbuffered or non-ECC DIMMs is not supported.

Erősségek

  • 128GB total capacity with two 64GB modules for high-density workloads
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • DDR4 3200 speed rated at PC4-25600 for fast throughput on compatible systems
  • CL22 latency at 1.2V delivers stable operation within standard power limits
  • Validated for MSI WRX80 motherboards to ensure reliable compatibility

Műszaki adatok

BrandNEMIX RAM
SeriesMSI Server/Workstation Motherboard Compatible Series Memory
ModelMSI DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-924K2
Capacity128GB (2 x 64GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemMSI
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (2X64GB) DDR4 3200MHZ PC4-25600 2Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

How much heat does the 1.2 V DDR4 3200 kit generate under continuous load?

The modules run at 1.2 V with no heat spreader, so they rely on case airflow; typical RDIMM power draw at this voltage stays modest even at full throughput.

What must the system provide for these 288-pin registered ECC modules to function?

A motherboard with DDR4 RDIMM slots that supports ECC and registered memory, such as the MSI WRX80 platform this kit is validated for.

Will the 2Rx4 organisation work alongside older single-rank DDR4 DIMMs I keep installed?

Mixing 2Rx4 registered modules with single-rank DIMMs is not recommended; the memory controller treats each rank differently and can reduce stability or speed.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.