Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Two green DDR4 RDIMM sticks, no heat spreaders, 288 pins

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR4 3200 ECC RDIMM CL22 2Rx4 1.2V 288-Pin MSI WRX80 memory upgrade

SKU CH-WGZT-S4QT7

A 128 GB DDR4-3200 ECC registered dual-rank kit built for MSI WRX80 workstations

  • Capacity128GB (2 x 64GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 128GB 2X64GB

Ver as outras 4 configurações
  • 128GB total capacity with two 64GB modules for high-density workloads
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • DDR4 3200 speed rated at PC4-25600 for fast throughput on compatible systems
  • CL22 latency at 1.2V delivers stable operation within standard power limits
  • Validated for MSI WRX80 motherboards to ensure reliable compatibility

128GB DDR4 ECC RDIMM kit for MSI WRX80

This 128GB kit provides two 64GB DDR4 3200 registered DIMMs with ECC and a CAS latency of 22. It is built for the MSI WS WRX80 motherboard and operates at 1.2V. The modules use major OEM chips from Samsung, Micron or Hynix and carry part number MR25600-924K2.

Sustained load stability with registered ECC

Registered buffering reduces electrical load on the memory controller during continuous operation. ECC detects and corrects single-bit errors to maintain data integrity under prolonged workloads. The CL22 timing at 3200 MT/s delivers consistent throughput for server and workstation tasks. Stress testing under load is performed before shipment.

DDR4 288-pin RDIMM interface limits

The 288-pin DDR4 RDIMM form factor fits only DDR4 registered DIMM slots. Maximum speed is PC4-25600 (3200 MT/s) at 1.2V with 2Rx4 organisation. Systems must support registered ECC modules and the WRX80 platform to use this capacity. Mixing with unbuffered or non-ECC DIMMs is not supported.

Pontos fortes

  • 128GB total capacity with two 64GB modules for high-density workloads
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • DDR4 3200 speed rated at PC4-25600 for fast throughput on compatible systems
  • CL22 latency at 1.2V delivers stable operation within standard power limits
  • Validated for MSI WRX80 motherboards to ensure reliable compatibility

Especificações

BrandNEMIX RAM
SeriesMSI Server/Workstation Motherboard Compatible Series Memory
ModelMSI DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-924K2
Capacity128GB (2 x 64GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemMSI
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (2X64GB) DDR4 3200MHZ PC4-25600 2Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

How much heat does the 1.2 V DDR4 3200 kit generate under continuous load?

The modules run at 1.2 V with no heat spreader, so they rely on case airflow; typical RDIMM power draw at this voltage stays modest even at full throughput.

What must the system provide for these 288-pin registered ECC modules to function?

A motherboard with DDR4 RDIMM slots that supports ECC and registered memory, such as the MSI WRX80 platform this kit is validated for.

Will the 2Rx4 organisation work alongside older single-rank DDR4 DIMMs I keep installed?

Mixing 2Rx4 registered modules with single-rank DIMMs is not recommended; the memory controller treats each rank differently and can reduce stability or speed.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.