Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Two green DDR5 RDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR5 6400 CL52 1.1V 4Rx4 ECC RDIMM for Supermicro X14DBG-LC+ memory upgrade

SKU CH-B9N8-KH1M1

128 GB DDR5 6400 CL52 ECC registered RDIMM kit validated for Supermicro X14DBG-LC+ motherboards

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

Még 3 konfiguráció megtekintése
  • Exact DDR5-6400 CL52 1.10V spec match for full-speed recognition
  • 128GB (2×64GB) 4Rx4 registered ECC RDIMM for maximum density
  • Verified fitment for Supermicro X14DBG-LC+ 288-pin RDIMM slots
  • Registered architecture offloads controller for stable full-population operation
  • ECC corrects single-bit errors on the fly preventing data corruption

Exact 128GB DDR5-6400 kit for Supermicro X14DBG-LC+

This 128GB kit contains two 64GB DDR5 RDIMMs rated at 6400 MT/s with CL52 latency and 1.10V operation. The 4Rx4 registered ECC design matches the memory controller requirements of the Supermicro X14DBG-LC+ motherboard so the system recognises the full capacity at rated speed. It is intended for server administrators who need a validated capacity upgrade for this specific platform.

Registered ECC architecture offloads the memory

Registered buffering reduces electrical load on the memory controller when all slots are populated, allowing stable operation at the specified 1.10V. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in production workloads. The modules run without heat spreaders, relying on chassis airflow for thermal management.

288-pin RDIMM form factor fits the board's DIMM

The kit uses the 288-pin RDIMM form factor required by the Supermicro X14DBG-LC+ and will not fit UDIMM or SODIMM slots. Population order and maximum supported capacity per channel are defined in the motherboard manual and must be followed for correct operation. No additional cables, brackets or software licences are needed for installation.

Erősségek

  • Exact DDR5-6400 CL52 1.10V spec match for full-speed recognition
  • 128GB (2×64GB) 4Rx4 registered ECC RDIMM for maximum density
  • Verified fitment for Supermicro X14DBG-LC+ 288-pin RDIMM slots
  • Registered architecture offloads controller for stable full-population operation
  • ECC corrects single-bit errors on the fly preventing data corruption

Műszaki adatok

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-944K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

How do I install the 288-pin DDR5 RDIMM modules on the Supermicro X14DBG-LC+ and which slot order is critical?

Power down the server, open the chassis, and insert each 64GB module into the DIMM slots specified in the Supermicro X14DBG-LC+ manual for a 2-DIMM population; the registered RDIMM keying only fits one way, so press firmly until the ejector tabs click.

What maintenance or replacement will the 128GB DDR5 6400 kit need over its service life?

No scheduled maintenance is required; the modules have no heat spreader and operate at 1.1V, so keep server airflow clean and rely on ECC to correct single-bit errors — if a module ever fails, the lifetime replacement warranty covers a swap.

What is the first limit that appears when the 4Rx4 DDR5 6400 CL52 kit runs sustained workloads?

The CAS latency of CL52 at 6400 MT/s sets the timing boundary; under continuous heavy load the memory controller will throttle to maintain stability at the rated 1.10V before any thermal limit is reached.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.