Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Two green circuit boards with gold edge connectors and black memory chips side by side

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR3 1600 PC3-12800 1.35V 204-Pin SODIMM Kit Synology Compatible memory upgrade

SKU CH-YT2Q-VRMQ7

16 GB dual-channel DDR3 SODIMM kit running at 1600 MHz with 1.35 V low voltage for Synology NAS upgrades

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.35V
  • 16 GB dual-channel kit boosts NAS responsiveness
  • DDR3 1600 speed matches Synology specifications
  • 35 V low-voltage modules reduce power draw
  • 204-pin SODIMM form factor fits compatible bays
  • Rigorously stress-tested for enterprise reliability

Synology-ready DDR3 SODIMM kit

This NEMIX RAM kit supplies 16 GB of DDR3 memory in two 8 GB SODIMM modules. It runs at 1600 MHz with a CAS latency of 11 and operates at 1.35 V. The 204-pin unbuffered, non-ECC design matches the specifications for compatible Synology RackStation and DiskStation NAS units.

NAS owners upgrading supported Synology models

The kit fits systems that accept DDR3 1600 SODIMM memory without ECC or registered buffers. Builders working with desktop DIMM slots, ECC-required platforms or systems that only support DDR5 cannot use this SODIMM kit. Laptops or servers needing a different voltage or pin count should also look elsewhere.

Dual-rank 2Rx8 organisation

Each 8 GB module uses a 2Rx8 configuration built from major OEM chips. This rank structure is the single specification that determines whether the memory will initialise correctly in the target Synology NAS.

Erősségek

  • 16 GB dual-channel kit boosts NAS responsiveness
  • DDR3 1600 speed matches Synology specifications
  • 35 V low-voltage modules reduce power draw
  • 204-pin SODIMM form factor fits compatible bays
  • Rigorously stress-tested for enterprise reliability

Műszaki adatok

BrandNEMIX RAM
SeriesSynology Compatible Series NAS Memory
ModelSynology DDR3 1600MHZ Non-ECC Unbuffered SODIMM NAS Memory
Part NumberMS12800-428K2
Capacity16GB (2 x 8GB)
SpeedDDR3 1600 (PC3 12800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.35V
Compatible SystemSynology
CAS LatencyCL11
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR3 1600MHZ PC3-12800 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Kérdések a termékről

Does the 1.35 V voltage help keep heat down when the NAS runs continuously?

The modules operate at 1.35 V, which is lower than standard DDR3 voltage and therefore generates less heat during all-day operation.

What must the Synology unit already have to accept this 204-pin SODIMM kit?

The system needs two free 204-pin DDR3 SODIMM slots that support unbuffered non-ECC memory at 1600 MHz.

Will the CL11 latency match the timing of the original memory in my Synology?

These sticks run at CL11 latency, the same CAS timing used by Synology's factory DDR3 1600 modules, so they will run in step with the original memory.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.