BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00278882BTC
재고 있음
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR3 1600 PC3-12800 1.35V 204-Pin SODIMM Kit Synology Compatible memory upgrade
16 GB dual-channel DDR3 SODIMM kit running at 1600 MHz with 1.35 V low voltage for Synology NAS upgrades
- Capacity16GB (2 x 8GB)
- SpeedDDR3 1600 (PC3 12800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.35V
- 16 GB dual-channel kit boosts NAS responsiveness
- DDR3 1600 speed matches Synology specifications
- 35 V low-voltage modules reduce power draw
- 204-pin SODIMM form factor fits compatible bays
- Rigorously stress-tested for enterprise reliability
Synology-ready DDR3 SODIMM kit
This NEMIX RAM kit supplies 16 GB of DDR3 memory in two 8 GB SODIMM modules. It runs at 1600 MHz with a CAS latency of 11 and operates at 1.35 V. The 204-pin unbuffered, non-ECC design matches the specifications for compatible Synology RackStation and DiskStation NAS units.
NAS owners upgrading supported Synology models
The kit fits systems that accept DDR3 1600 SODIMM memory without ECC or registered buffers. Builders working with desktop DIMM slots, ECC-required platforms or systems that only support DDR5 cannot use this SODIMM kit. Laptops or servers needing a different voltage or pin count should also look elsewhere.
Dual-rank 2Rx8 organisation
Each 8 GB module uses a 2Rx8 configuration built from major OEM chips. This rank structure is the single specification that determines whether the memory will initialise correctly in the target Synology NAS.
주요 특징
- 16 GB dual-channel kit boosts NAS responsiveness
- DDR3 1600 speed matches Synology specifications
- 35 V low-voltage modules reduce power draw
- 204-pin SODIMM form factor fits compatible bays
- Rigorously stress-tested for enterprise reliability
사양
| Brand | NEMIX RAM |
|---|---|
| Series | Synology Compatible Series NAS Memory |
| Model | Synology DDR3 1600MHZ Non-ECC Unbuffered SODIMM NAS Memory |
| Part Number | MS12800-428K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1600 (PC3 12800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.35V |
| Compatible System | Synology |
| CAS Latency | CL11 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR3 1600MHZ PC3-12800 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT |
이 상품에 대한 질문
Does the 1.35 V voltage help keep heat down when the NAS runs continuously?
The modules operate at 1.35 V, which is lower than standard DDR3 voltage and therefore generates less heat during all-day operation.
What must the Synology unit already have to accept this 204-pin SODIMM kit?
The system needs two free 204-pin DDR3 SODIMM slots that support unbuffered non-ECC memory at 1600 MHz.
Will the CL11 latency match the timing of the original memory in my Synology?
These sticks run at CL11 latency, the same CAS timing used by Synology's factory DDR3 1600 modules, so they will run in step with the original memory.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
