Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Two green DDR4 SODIMM sticks, no heat spreaders, gold contacts, 260-pin

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2666MHz CL19 1.2V ECC SODIMM for Synology RS822+

SKU CH-DYS3-5A3YP

ECC DDR4 SODIMM kit adds 16 GB at 2666 MHz CL19 for Synology RS822+ NAS

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2666 (PC4 21300)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection guards data integrity on Synology RS822+
  • 16 GB kit (2 × 8 GB) expands NAS capacity
  • DDR4 2666 MHz CL19 matches system spec
  • 2 V low-voltage modules reduce power draw
  • 260-pin SODIMM form factor fits RS822+ slots

Synology RS822+ DDR4 ECC SODIMM Kit

This 16 GB kit contains two 8 GB DDR4 2666 MHz ECC unbuffered SODIMM modules built for the Synology RS822+ NAS. It runs at 1.20 V with CL19 latency and uses a 260-pin form factor. The memory targets IT professionals who need validated ECC reliability for mission-critical storage workloads.

2x8 GB Matched Pair With ECC Validation

The paired modules are stress-tested together to ensure stable dual-channel operation inside the RS822+. ECC circuitry detects and corrects single-bit errors, protecting data integrity during intensive file serving or backup tasks. No heat spreaders are included, keeping the low-profile SODIMM height compatible with the NAS chassis.

DDR4 2666 SODIMM Interface Constraints

The 260-pin DDR4 SODIMM slot limits upgrades to unbuffered ECC modules at this speed and voltage. Higher-frequency or registered DIMMs will not function in the RS822+ memory controller. Builders needing more than 16 GB total capacity cannot use this kit alone.

Erősségek

  • ECC protection guards data integrity on Synology RS822+
  • 16 GB kit (2 × 8 GB) expands NAS capacity
  • DDR4 2666 MHz CL19 matches system spec
  • 2 V low-voltage modules reduce power draw
  • 260-pin SODIMM form factor fits RS822+ slots

Műszaki adatok

BrandNEMIX RAM
SeriesSynology Compatible Series NAS Memory
ModelSynology DDR4 2666MHZ ECC Unbuffered SODIMM
Part NumberMSE21300-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2666 (PC4 21300)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSynology
CAS LatencyCL19
Heat SpreaderNo
Type260-PIN DDR4 ECC SODIMM
Rank1Rx8
FeaturesDDR4 ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 260-PIN ECC Unbuffered SODIMM KIT

Kérdések a termékről

Will the ECC SODIMM modules need replacement after a certain number of write cycles?

ECC DRAM does not wear out from write cycles; the modules only require replacement if a hardware fault develops.

What is the first limit reached when the kit runs at 2666MHz CL19 continuously?

The CAS latency of CL19 sets the timing ceiling; sustained throughput cannot exceed the DDR4 2666 bus rate.

How much heat and power does the 1.2V kit produce during all-day NAS operation?

At 1.20V with no heat spreader the modules run cool and draw minimal power, so fan noise stays low in the RS822+.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.