BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00279328BTC
現貨
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 2666MHz CL19 1.2V ECC SODIMM for Synology RS822+
ECC DDR4 SODIMM kit adds 16 GB at 2666 MHz CL19 for Synology RS822+ NAS
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2666 (PC4 21300)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection guards data integrity on Synology RS822+
- 16 GB kit (2 × 8 GB) expands NAS capacity
- DDR4 2666 MHz CL19 matches system spec
- 2 V low-voltage modules reduce power draw
- 260-pin SODIMM form factor fits RS822+ slots
Synology RS822+ DDR4 ECC SODIMM Kit
This 16 GB kit contains two 8 GB DDR4 2666 MHz ECC unbuffered SODIMM modules built for the Synology RS822+ NAS. It runs at 1.20 V with CL19 latency and uses a 260-pin form factor. The memory targets IT professionals who need validated ECC reliability for mission-critical storage workloads.
2x8 GB Matched Pair With ECC Validation
The paired modules are stress-tested together to ensure stable dual-channel operation inside the RS822+. ECC circuitry detects and corrects single-bit errors, protecting data integrity during intensive file serving or backup tasks. No heat spreaders are included, keeping the low-profile SODIMM height compatible with the NAS chassis.
DDR4 2666 SODIMM Interface Constraints
The 260-pin DDR4 SODIMM slot limits upgrades to unbuffered ECC modules at this speed and voltage. Higher-frequency or registered DIMMs will not function in the RS822+ memory controller. Builders needing more than 16 GB total capacity cannot use this kit alone.
商品特色
- ECC protection guards data integrity on Synology RS822+
- 16 GB kit (2 × 8 GB) expands NAS capacity
- DDR4 2666 MHz CL19 matches system spec
- 2 V low-voltage modules reduce power draw
- 260-pin SODIMM form factor fits RS822+ slots
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | Synology Compatible Series NAS Memory |
| Model | Synology DDR4 2666MHZ ECC Unbuffered SODIMM |
| Part Number | MSE21300-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Synology |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 260-PIN DDR4 ECC SODIMM |
| Rank | 1Rx8 |
| Features | DDR4 ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 260-PIN ECC Unbuffered SODIMM KIT |
商品問答
Will the ECC SODIMM modules need replacement after a certain number of write cycles?
ECC DRAM does not wear out from write cycles; the modules only require replacement if a hardware fault develops.
What is the first limit reached when the kit runs at 2666MHz CL19 continuously?
The CAS latency of CL19 sets the timing ceiling; sustained throughput cannot exceed the DDR4 2666 bus rate.
How much heat and power does the 1.2V kit produce during all-day NAS operation?
At 1.20V with no heat spreader the modules run cool and draw minimal power, so fan noise stays low in the RS822+.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
