BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.0027802BTC
Raktáron
NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 1Rx8 1.2V 288-Pin UDIMM SuperMicro MBD-C9Z590-CGW memory upgrade
A 16 GB DDR4 3200 UDIMM module built for SuperMicro MBD-C9Z590-CGW workstations, running at CL22 and 1.2 V
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16GB DDR4 3200MHz boosts desktop responsiveness
- CL22 latency at 1.2V balances speed and efficiency
- 1Rx8 single-rank design simplifies memory controller load
- 288-pin UDIMM form factor fits SuperMicro MBD-C9Z590-CGW
- Major OEM chips from Samsung, Micron, Hynix ensure reliability
16GB DDR4 3200 UDIMM for Supermicro MBD-C9Z590-CGW
This 16GB DDR4 3200 module is built for the Supermicro MBD-C9Z590-CGW motherboard. It runs at 1.2V with CL22 latency and a single-rank 1Rx8 layout. The unbuffered non-ECC design suits desktop and workstation boards that accept standard UDIMMs. No heat spreader is fitted.
Sustained-load behaviour
Rigorous stress testing under load is performed on every module before shipment. The 1.2V operating voltage and CL22 timing remain stable during extended workloads. Unbuffered operation avoids the extra latency of registered designs. Single-rank organisation helps keep signal integrity consistent across long sessions.
Check before ordering
Confirm the motherboard is the exact Supermicro MBD-C9Z590-CGW model. Verify the board has a free 288-pin DDR4 UDIMM slot and supports non-ECC unbuffered memory at 3200 MT/s. Ensure the system does not require ECC or registered modules. Check the manual for maximum capacity per slot and total system limit.
Erősségek
- 16GB DDR4 3200MHz boosts desktop responsiveness
- CL22 latency at 1.2V balances speed and efficiency
- 1Rx8 single-rank design simplifies memory controller load
- 288-pin UDIMM form factor fits SuperMicro MBD-C9Z590-CGW
- Major OEM chips from Samsung, Micron, Hynix ensure reliability
Műszaki adatok
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-618K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM |
Kérdések a termékről
How much power does the 1.2V DDR4 module draw when the system runs continuously?
The module operates at 1.20V, the standard DDR4 voltage, so power draw stays low even under sustained load.
What motherboard slot and chipset must I already have for this 288-pin UDIMM to work?
It requires a DDR4 288-pin UDIMM slot on a Supermicro MBD-C9Z590-CGW or compatible board that supports non-ECC unbuffered memory.
Will this CL22 3200MHz stick run stably alongside older DDR4 modules I keep installed?
The system will clock all modules to the slowest speed and loosest timing, so this CL22 3200MHz module will downclock to match older DDR4 sticks.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00280606BTC
Raktáron
