我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green 288-pin DDR4 UDIMM module without heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 1Rx8 1.2V 288-Pin UDIMM SuperMicro MBD-C9Z590-CGW memory upgrade

SKU CH-DMVB-X0HQ8

A 16 GB DDR4 3200 UDIMM module built for SuperMicro MBD-C9Z590-CGW workstations, running at CL22 and 1.2 V

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB DDR4 3200MHz boosts desktop responsiveness
  • CL22 latency at 1.2V balances speed and efficiency
  • 1Rx8 single-rank design simplifies memory controller load
  • 288-pin UDIMM form factor fits SuperMicro MBD-C9Z590-CGW
  • Major OEM chips from Samsung, Micron, Hynix ensure reliability

16GB DDR4 3200 UDIMM for Supermicro MBD-C9Z590-CGW

This 16GB DDR4 3200 module is built for the Supermicro MBD-C9Z590-CGW motherboard. It runs at 1.2V with CL22 latency and a single-rank 1Rx8 layout. The unbuffered non-ECC design suits desktop and workstation boards that accept standard UDIMMs. No heat spreader is fitted.

Sustained-load behaviour

Rigorous stress testing under load is performed on every module before shipment. The 1.2V operating voltage and CL22 timing remain stable during extended workloads. Unbuffered operation avoids the extra latency of registered designs. Single-rank organisation helps keep signal integrity consistent across long sessions.

Check before ordering

Confirm the motherboard is the exact Supermicro MBD-C9Z590-CGW model. Verify the board has a free 288-pin DDR4 UDIMM slot and supports non-ECC unbuffered memory at 3200 MT/s. Ensure the system does not require ECC or registered modules. Check the manual for maximum capacity per slot and total system limit.

商品特色

  • 16GB DDR4 3200MHz boosts desktop responsiveness
  • CL22 latency at 1.2V balances speed and efficiency
  • 1Rx8 single-rank design simplifies memory controller load
  • 288-pin UDIMM form factor fits SuperMicro MBD-C9Z590-CGW
  • Major OEM chips from Samsung, Micron, Hynix ensure reliability

商品規格

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-618K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM

商品問答

How much power does the 1.2V DDR4 module draw when the system runs continuously?

The module operates at 1.20V, the standard DDR4 voltage, so power draw stays low even under sustained load.

What motherboard slot and chipset must I already have for this 288-pin UDIMM to work?

It requires a DDR4 288-pin UDIMM slot on a Supermicro MBD-C9Z590-CGW or compatible board that supports non-ECC unbuffered memory.

Will this CL22 3200MHz stick run stably alongside older DDR4 modules I keep installed?

The system will clock all modules to the slowest speed and loosest timing, so this CL22 3200MHz module will downclock to match older DDR4 sticks.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。