NEMIX RAM 8GB DDR4 3200 ECC Registered RDIMM 1Rx8 CL22 memory upgrade
- 8GB
- 288-Pin DDR4 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
NEMIX RAM
16 GB DDR4 ECC Registered RDIMM running at 3200 MHz CL22 for Supermicro X12SPT-G and X12SPT-GC motherboards
Size 16GB
This 16 GB DDR4 registered ECC module is built for Supermicro X12SPT-G and X12SPT-GC motherboards. The 1Rx8 rank, 1.2 V operation and CL22 timing match the board's memory controller so the system recognises full capacity at rated speed.
Registered architecture buffers address and command signals reducing electrical load on the memory controller when every slot is populated. Standard 1.2 V DDR4 voltage keeps power draw predictable without active cooling.
288-pin RDIMM form factor fits only registered DIMM slots; it will not work in UDIMM or SODIMM sockets. Samsung Micron or Hynix DRAM chips provide enterprise-grade reliability while ECC corrects single-bit errors on the fly. Not for desktop boards that require unbuffered memory.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR4 ECC RDIMM Registered Server Memory |
| Part Number | MR25600-618K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR4 RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR4 ECC RDIMM Motherboard Compatible |
| Package Content | 16GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC RDIMM KIT |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Power down the server, open the chassis, align the 288-pin key with the DDR4 slot, press straight down until both clips lock, then verify the board's manual for the exact DIMM population order — some Supermicro boards require specific slots to be filled first when running a single 1Rx8 module.
The module itself has no user-serviceable parts; ECC corrects single-bit errors on the fly, but if uncorrectable errors appear in system logs the DIMM should be replaced. Dust the slot contacts with compressed air during scheduled server cleaning.
The 1.2 V JEDEC voltage and CL22 latency are fixed; under continuous load the memory controller's thermal throttle point or the board's maximum supported capacity per channel will be reached before the module's own timing limits.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?