Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular circuit board with gold edge connector and black memory chips

NEMIX RAM

NEMIX RAM 16GB DDR4 3200MHz CL22 1Rx8 ECC Registered RDIMM memory upgrade

SKU CH-0M5G-GAR86

16 GB DDR4 ECC Registered RDIMM running at 3200 MHz CL22 for Supermicro X12SPT-G and X12SPT-GC motherboards

  • Capacity16GB
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 16GB

Nog 8 configuraties tonen
  • 16 GB DDR4-3200 CL22 ECC Registered RDIMM runs at rated speed on Supermicro X12SPT-G boards
  • 1Rx8 1.20 V registered design keeps every slot stable when fully populated
  • ECC corrects single-bit errors on the fly preventing silent data corruption
  • 288-pin RDIMM form factor matches the motherboard's required memory-population rules
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability

Exact-fit server upgrade

This 16 GB DDR4 registered ECC module is built for Supermicro X12SPT-G and X12SPT-GC motherboards. The 1Rx8 rank, 1.2 V operation and CL22 timing match the board's memory controller so the system recognises full capacity at rated speed.

Thermals and power

Registered architecture buffers address and command signals reducing electrical load on the memory controller when every slot is populated. Standard 1.2 V DDR4 voltage keeps power draw predictable without active cooling.

Build and connectors

288-pin RDIMM form factor fits only registered DIMM slots; it will not work in UDIMM or SODIMM sockets. Samsung Micron or Hynix DRAM chips provide enterprise-grade reliability while ECC corrects single-bit errors on the fly. Not for desktop boards that require unbuffered memory.

Pluspunten

  • 16 GB DDR4-3200 CL22 ECC Registered RDIMM runs at rated speed on Supermicro X12SPT-G boards
  • 1Rx8 1.20 V registered design keeps every slot stable when fully populated
  • ECC corrects single-bit errors on the fly preventing silent data corruption
  • 288-pin RDIMM form factor matches the motherboard's required memory-population rules
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-618K1
Capacity16GB
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC RDIMM Motherboard Compatible
Package Content16GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How do I install this 288-pin RDIMM into my Supermicro X12SPT-G motherboard, and which slot-population rule do people miss?

Power down the server, open the chassis, align the 288-pin key with the DDR4 slot, press straight down until both clips lock, then verify the board's manual for the exact DIMM population order — some Supermicro boards require specific slots to be filled first when running a single 1Rx8 module.

What maintenance or replacement will this ECC Registered module need over its service life?

The module itself has no user-serviceable parts; ECC corrects single-bit errors on the fly, but if uncorrectable errors appear in system logs the DIMM should be replaced. Dust the slot contacts with compressed air during scheduled server cleaning.

What limit appears first when this 16 GB CL22 1.2 V kit runs sustained workloads?

The 1.2 V JEDEC voltage and CL22 latency are fixed; under continuous load the memory controller's thermal throttle point or the board's maximum supported capacity per channel will be reached before the module's own timing limits.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.