BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.0027816BTC
Raktáron
NEMIX RAM
NEMIX RAM 16GB DDR5 5600 CL46 1Rx8 1.1V UDIMM Kingston KVR56U46BS8-16 memory upgrade
A 16 GB DDR5 desktop module running at 5600 MT/s with CL46 latency and 1.1 V operation
- Capacity16GB
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 16GB DDR5 5600 boosts desktop responsiveness
- CL46 1Rx8 timing delivers stable throughput
- 1V operation reduces power draw
- 288-pin UDIMM fits standard DDR5 slots
- Samsung Micron Hynix chips ensure module reliability
16GB DDR5 5600 UDIMM for Kingston systems
This 16GB DDR5 module runs at 5600MT/s with CL46 latency and 1.1V operation. It is built as a 1Rx8 unbuffered non-ECC UDIMM using 288-pin layout. The part targets desktop PCs that require Kingston KVR56U46BS8-16 compatibility.
Sustained-load behaviour with major OEM chips
Modules use Samsung, Micron or Hynix ICs and are stress tested under load to verify stability during extended workloads. The unbuffered design feeds data directly to the memory controller without register delay. Operation stays at the standard 1.1V DDR5 voltage envelope.
The CL46 latency at 5600MT/s decides fit
CL46 is the primary timing figure that determines whether this module matches the motherboard's supported memory profile. Systems requiring lower latency at this speed will not accept this part. Buyers who need ECC error correction or registered buffering must choose a different module.
Erősségek
- 16GB DDR5 5600 boosts desktop responsiveness
- CL46 1Rx8 timing delivers stable throughput
- 1V operation reduces power draw
- 288-pin UDIMM fits standard DDR5 slots
- Samsung Micron Hynix chips ensure module reliability
Műszaki adatok
| Brand | NEMIX RAM |
|---|---|
| Series | Kingston Desktop PC Compatible Series Memory |
| Model | Kingston DDR5 5600MHZ ECC Unbuffered UDIMM |
| Part Number | MD44800-618K1 |
| Capacity | 16GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Kingston |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM |
Kérdések a termékről
How much heat does the 1.10V DDR5 module generate under continuous load?
At 1.10V the 16GB stick runs cooler than higher-voltage DDR5, and the absence of a heat spreader means it relies on case airflow for thermal management.
What motherboard slot and firmware are required for the 288-pin 5600 kit to function?
A DDR5-compatible motherboard with a 288-pin UDIMM slot and a BIOS that supports 5600 MT/s operation is required for the module to run at its rated speed.
Will the 1Rx8 5600 module downclock automatically if paired with slower DDR5 sticks?
Yes, the 1Rx8 module will negotiate the lowest common speed and latency with any other DDR5 DIMMs installed, running all channels at the slower kit's timings.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00280748BTC
Raktáron
