We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 1Rx8 1.1V UDIMM Kingston KVR56U46BS8-16 memory upgrade

SKU CH-EXNF-A9CVM

A 16 GB DDR5 desktop module running at 5600 MT/s with CL46 latency and 1.1 V operation

  • Capacity16GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16GB DDR5 5600 boosts desktop responsiveness
  • CL46 1Rx8 timing delivers stable throughput
  • 1V operation reduces power draw
  • 288-pin UDIMM fits standard DDR5 slots
  • Samsung Micron Hynix chips ensure module reliability

16GB DDR5 5600 UDIMM for Kingston systems

This 16GB DDR5 module runs at 5600MT/s with CL46 latency and 1.1V operation. It is built as a 1Rx8 unbuffered non-ECC UDIMM using 288-pin layout. The part targets desktop PCs that require Kingston KVR56U46BS8-16 compatibility.

Sustained-load behaviour with major OEM chips

Modules use Samsung, Micron or Hynix ICs and are stress tested under load to verify stability during extended workloads. The unbuffered design feeds data directly to the memory controller without register delay. Operation stays at the standard 1.1V DDR5 voltage envelope.

The CL46 latency at 5600MT/s decides fit

CL46 is the primary timing figure that determines whether this module matches the motherboard's supported memory profile. Systems requiring lower latency at this speed will not accept this part. Buyers who need ECC error correction or registered buffering must choose a different module.

Highlights

  • 16GB DDR5 5600 boosts desktop responsiveness
  • CL46 1Rx8 timing delivers stable throughput
  • 1V operation reduces power draw
  • 288-pin UDIMM fits standard DDR5 slots
  • Samsung Micron Hynix chips ensure module reliability

Specifications

BrandNEMIX RAM
SeriesKingston Desktop PC Compatible Series Memory
ModelKingston DDR5 5600MHZ ECC Unbuffered UDIMM
Part NumberMD44800-618K1
Capacity16GB
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemKingston
CAS LatencyCL46
Heat SpreaderNo
Type288-PIN DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM

Questions about this item

How much heat does the 1.10V DDR5 module generate under continuous load?

At 1.10V the 16GB stick runs cooler than higher-voltage DDR5, and the absence of a heat spreader means it relies on case airflow for thermal management.

What motherboard slot and firmware are required for the 288-pin 5600 kit to function?

A DDR5-compatible motherboard with a 288-pin UDIMM slot and a BIOS that supports 5600 MT/s operation is required for the module to run at its rated speed.

Will the 1Rx8 5600 module downclock automatically if paired with slower DDR5 sticks?

Yes, the 1Rx8 module will negotiate the lowest common speed and latency with any other DDR5 DIMMs installed, running all channels at the slower kit's timings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.