BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.0027736BTC
Raktáron
NEMIX RAM
NEMIX RAM 16GB DDR5 6400 CL52 1Rx8 1.1V ECC RDIMM Supermicro H13DSH memory upgrade
16 GB DDR5 6400 ECC RDIMM with 1Rx8 registered design and CL52 latency for Supermicro H13DSH servers
- Capacity16GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 16 GB DDR5 6400 speed matches server controller for full rated throughput
- Registered ECC design offloads memory controller and corrects single-bit errors automatically
- 1Rx8 1.1 V CL52 timing is the exact spec Supermicro H13DSH expects
- 288-pin RDIMM form factor fits the board's required slot type precisely
- Lifetime replacement warranty with US-based technical support included
Supermicro H13DSH memory upgrade
This 16 GB DDR5 module is built as an exact-match upgrade for the Supermicro H13DSH motherboard. It delivers registered ECC memory in the 288-pin RDIMM form factor that the board requires. The module targets server administrators who need to expand capacity with a single validated DIMM.
Registered ECC RDIMM with 1Rx8 organisation
The single specification that decides fitment is the registered ECC RDIMM design with 1Rx8 organisation at 1.10 V. This matches the memory controller expectations for rank, voltage and timing so the system recognises the full capacity at the rated DDR5 6400 speed. Builders needing unbuffered UDIMMs or a different rank structure cannot use this part.
Sustained operation with error correction
Under continuous load the registered architecture buffers address and command signals, reducing electrical stress on the memory controller when all slots are populated. On-die ECC corrects single-bit errors in real time, preventing silent data corruption that would otherwise cause unplanned reboots during long-running workloads.
Erősségek
- 16 GB DDR5 6400 speed matches server controller for full rated throughput
- Registered ECC design offloads memory controller and corrects single-bit errors automatically
- 1Rx8 1.1 V CL52 timing is the exact spec Supermicro H13DSH expects
- 288-pin RDIMM form factor fits the board's required slot type precisely
- Lifetime replacement warranty with US-based technical support included
Műszaki adatok
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Kérdések a termékről
Will the rated 6400 MT/s speed actually run on a Supermicro H13DSH without manual tuning?
The module is an exact-match upgrade for the H13DSH, so the memory controller recognises the 1Rx8 registered ECC profile at 1.10 V and CL52, allowing it to operate at the full DDR5 6400 (PC5-51200) data rate without extra configuration.
Does the 288-pin RDIMM form factor limit which memory slots I can populate on the H13DSH?
The board requires 288-pin registered RDIMMs — not UDIMMs or SODIMMs — and its population rules dictate the supported capacities and slot order; consult the motherboard manual for the approved sequence before installing.
What physical clearance does this module need inside a 1U or 2U chassis?
The stick uses a standard 288-pin RDIMM height with no heat spreader, so it fits the typical low-profile DIMM sockets found in 1U and 2U server chassis without interfering with airflow shrouds or CPU coolers.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
