Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green printed circuit board DDR5 RDIMM memory module with black chips no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR5 6400 CL52 1Rx8 1.1V ECC RDIMM Supermicro H13DSH memory upgrade

SKU CH-4GMS-3X07H

16 GB DDR5 6400 ECC RDIMM with 1Rx8 registered design and CL52 latency for Supermicro H13DSH servers

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 16 GB DDR5 6400 speed matches server controller for full rated throughput
  • Registered ECC design offloads memory controller and corrects single-bit errors automatically
  • 1Rx8 1.1 V CL52 timing is the exact spec Supermicro H13DSH expects
  • 288-pin RDIMM form factor fits the board's required slot type precisely
  • Lifetime replacement warranty with US-based technical support included

Supermicro H13DSH memory upgrade

This 16 GB DDR5 module is built as an exact-match upgrade for the Supermicro H13DSH motherboard. It delivers registered ECC memory in the 288-pin RDIMM form factor that the board requires. The module targets server administrators who need to expand capacity with a single validated DIMM.

Registered ECC RDIMM with 1Rx8 organisation

The single specification that decides fitment is the registered ECC RDIMM design with 1Rx8 organisation at 1.10 V. This matches the memory controller expectations for rank, voltage and timing so the system recognises the full capacity at the rated DDR5 6400 speed. Builders needing unbuffered UDIMMs or a different rank structure cannot use this part.

Sustained operation with error correction

Under continuous load the registered architecture buffers address and command signals, reducing electrical stress on the memory controller when all slots are populated. On-die ECC corrects single-bit errors in real time, preventing silent data corruption that would otherwise cause unplanned reboots during long-running workloads.

Ciri-ciri utama

  • 16 GB DDR5 6400 speed matches server controller for full rated throughput
  • Registered ECC design offloads memory controller and corrects single-bit errors automatically
  • 1Rx8 1.1 V CL52 timing is the exact spec Supermicro H13DSH expects
  • 288-pin RDIMM form factor fits the board's required slot type precisely
  • Lifetime replacement warranty with US-based technical support included

Spesifikasi

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Soalan tentang produk ini

Will the rated 6400 MT/s speed actually run on a Supermicro H13DSH without manual tuning?

The module is an exact-match upgrade for the H13DSH, so the memory controller recognises the 1Rx8 registered ECC profile at 1.10 V and CL52, allowing it to operate at the full DDR5 6400 (PC5-51200) data rate without extra configuration.

Does the 288-pin RDIMM form factor limit which memory slots I can populate on the H13DSH?

The board requires 288-pin registered RDIMMs — not UDIMMs or SODIMMs — and its population rules dictate the supported capacities and slot order; consult the motherboard manual for the approved sequence before installing.

What physical clearance does this module need inside a 1U or 2U chassis?

The stick uses a standard 288-pin RDIMM height with no heat spreader, so it fits the typical low-profile DIMM sockets found in 1U and 2U server chassis without interfering with airflow shrouds or CPU coolers.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.