Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Two green DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 256GB 2x128GB DDR5 4800 ECC RDIMM 2Rx4 CL40 1.1V Supermicro H13SSH-E memory upgrade

SKU CH-5NBM-YKJMF

A 256 GB DDR5 kit of two 128 GB registered ECC modules at 4800 MHz with CL40 latency and 1.1 V, built for the Supermicro H13SSH-E motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

Még 30 konfiguráció megtekintése
  • 256 GB capacity with two 128 GB modules for full server utilisation
  • DDR5 4800 speed rated at PC5-38400 for rated throughput
  • Registered ECC RDIMM with 2Rx4 organisation for stable fully-populated operation
  • CL40 latency at 1.1 V matching the memory controller specification
  • Verified fitment for Supermicro H13SSH-E motherboard 288-pin slots

Capacity and form factor

This NEMIX RAM kit provides 256 GB of DDR5 memory across two 128 GB modules in a 288-pin RDIMM form factor. The modules run at 4800 MT/s with a CAS latency of 40 and operate at 1.1 V. They are registered and include ECC for error correction.

Suitable for Supermicro H13SSH-E servers

The kit is validated for the Supermicro H13SSH-E motherboard and matches the board's requirement for registered DDR5 DIMMs. It is not suitable for systems that accept only unbuffered UDIMMs or SODIMMs. Builders needing a different capacity or rank configuration should verify their platform's qualified vendor list before ordering.

Registered ECC architecture

The registered design buffers address and command signals, allowing the memory controller to drive fully populated slots at the rated 4800 MT/s. ECC corrects single-bit errors on the fly to prevent silent data corruption. This combination is the specification that determines whether the modules will be recognised and run stably in the target server.

Erősségek

  • 256 GB capacity with two 128 GB modules for full server utilisation
  • DDR5 4800 speed rated at PC5-38400 for rated throughput
  • Registered ECC RDIMM with 2Rx4 organisation for stable fully-populated operation
  • CL40 latency at 1.1 V matching the memory controller specification
  • Verified fitment for Supermicro H13SSH-E motherboard 288-pin slots

Műszaki adatok

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

Should I choose the 256GB kit or a different capacity for my Supermicro H13SSH-E?

This kit provides 256GB as two 128GB modules. The H13SSH-E supports this exact capacity and rank configuration, so it will be recognised at full capacity and run at the rated 4800 speed.

What does the 4800 speed rating mean once the modules are installed in the server?

The memory will operate at DDR5 4800 (PC5 38400) with CL40 latency at 1.1V. The registered design lets every slot run fully populated at this rated speed without downclocking.

How does the 288-pin RDIMM interface affect what I can install?

The 288-pin RDIMM form factor is the only type the H13SSH-E accepts. It matches the board's memory population rules, so the kit installs directly without compatibility issues.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.