Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Four green DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 384GB 4x96GB DDR5 4800 CL40 1.1V ECC RDIMM Kit Supermicro H13DSG-OM

SKU CH-8X1G-CP89M

384 GB registered ECC DDR5 kit with four 96 GB modules at 4800 MT/s, CL40, 1.1 V, validated for Supermicro H13DSG-OM

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Még 30 konfiguráció megtekintése
  • 384 GB total capacity from four 96 GB modules for maximum memory density
  • DDR5 4800 speed with CL40 latency delivers rated performance on supported platforms
  • 1 V registered ECC design reduces controller load and corrects single-bit errors
  • 288-pin RDIMM form factor matches the Supermicro H13DSG-OM motherboard requirements
  • Lifetime replacement warranty with US-based technical support included

384GB DDR5 RDIMM Kit for Supermicro H13DSG-OM

This 384GB kit contains four 96GB DDR5 RDIMM modules rated at 4800 MT/s with CL40 latency and 1.1V operation. It is built as an exact-match upgrade for the Supermicro H13DSG-OM motherboard using registered ECC memory.

Suited for servers needing maximum registered ECC

The 2Rx4 registered design allows full population at rated speed while ECC corrects single-bit errors on the fly. Builders using UDIMM-only boards or consumer platforms should look elsewhere because this kit requires a registered DDR5 memory controller.

Standard 288-pin RDIMM installation

Modules install like any 288-pin RDIMM, but server boards often enforce specific population orders and capacity limits per channel. Consult the Supermicro H13DSG-OM manual for the approved slot sequence before seating all four modules.

Erősségek

  • 384 GB total capacity from four 96 GB modules for maximum memory density
  • DDR5 4800 speed with CL40 latency delivers rated performance on supported platforms
  • 1 V registered ECC design reduces controller load and corrects single-bit errors
  • 288-pin RDIMM form factor matches the Supermicro H13DSG-OM motherboard requirements
  • Lifetime replacement warranty with US-based technical support included

Műszaki adatok

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

Does my Supermicro H13DSG-OM motherboard need a specific BIOS version or CPU to recognise all four 96GB 2Rx4 modules at 4800MHz?

The kit is spec-matched to the Supermicro H13DSG-OM motherboard. Consult your system or motherboard manual for supported capacities, approved DIMM population order, and installation steps before purchase.

Can I keep my existing DDR5 RDIMMs installed alongside these four 96GB 2Rx4 modules without breaking registered ECC operation?

Mixing different capacities or ranks can prevent full-speed operation or cause training failures. For enterprise stability, populate all slots with identical 2Rx4 registered ECC modules as specified by the board's population rules.

How do I verify the kit is running at DDR5 4800 CL40 1.1V with ECC active after installation?

Enter the BIOS or use a hardware inventory tool to confirm the memory reports 4800MT/s, CL40 timing, 1.1V voltage, registered ECC status, and the full 384GB capacity across all four slots.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.