暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 384GB 4x96GB DDR5 4800 CL40 1.1V ECC RDIMM Kit Supermicro H13DSG-OM

SKU CH-8X1G-CP89M

384 GB registered ECC DDR5 kit with four 96 GB modules at 4800 MT/s, CL40, 1.1 V, validated for Supermicro H13DSG-OM

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

他に 30点の構成を表示
  • 384 GB total capacity from four 96 GB modules for maximum memory density
  • DDR5 4800 speed with CL40 latency delivers rated performance on supported platforms
  • 1 V registered ECC design reduces controller load and corrects single-bit errors
  • 288-pin RDIMM form factor matches the Supermicro H13DSG-OM motherboard requirements
  • Lifetime replacement warranty with US-based technical support included

384GB DDR5 RDIMM Kit for Supermicro H13DSG-OM

This 384GB kit contains four 96GB DDR5 RDIMM modules rated at 4800 MT/s with CL40 latency and 1.1V operation. It is built as an exact-match upgrade for the Supermicro H13DSG-OM motherboard using registered ECC memory.

Suited for servers needing maximum registered ECC

The 2Rx4 registered design allows full population at rated speed while ECC corrects single-bit errors on the fly. Builders using UDIMM-only boards or consumer platforms should look elsewhere because this kit requires a registered DDR5 memory controller.

Standard 288-pin RDIMM installation

Modules install like any 288-pin RDIMM, but server boards often enforce specific population orders and capacity limits per channel. Consult the Supermicro H13DSG-OM manual for the approved slot sequence before seating all four modules.

特長

  • 384 GB total capacity from four 96 GB modules for maximum memory density
  • DDR5 4800 speed with CL40 latency delivers rated performance on supported platforms
  • 1 V registered ECC design reduces controller load and corrects single-bit errors
  • 288-pin RDIMM form factor matches the Supermicro H13DSG-OM motherboard requirements
  • Lifetime replacement warranty with US-based technical support included

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does my Supermicro H13DSG-OM motherboard need a specific BIOS version or CPU to recognise all four 96GB 2Rx4 modules at 4800MHz?

The kit is spec-matched to the Supermicro H13DSG-OM motherboard. Consult your system or motherboard manual for supported capacities, approved DIMM population order, and installation steps before purchase.

Can I keep my existing DDR5 RDIMMs installed alongside these four 96GB 2Rx4 modules without breaking registered ECC operation?

Mixing different capacities or ranks can prevent full-speed operation or cause training failures. For enterprise stability, populate all slots with identical 2Rx4 registered ECC modules as specified by the board's population rules.

How do I verify the kit is running at DDR5 4800 CL40 1.1V with ECC active after installation?

Enter the BIOS or use a hardware inventory tool to confirm the memory reports 4800MT/s, CL40 timing, 1.1V voltage, registered ECC status, and the full 384GB capacity across all four slots.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。