暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 1TB 8x128GB DDR5 4800 CL40 2Rx4 RDIMM H13DSG-OM

SKU CH-M9T7-PTD1F

Eight-module 1 TB DDR5 registered ECC kit running at 4800 MT/s CL40, built for full-capacity stability on the Supermicro H13DSG-OM motherboard

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 1TB kit enables full server capacity with eight 128GB modules
  • DDR5 4800 speed matches the board's rated memory controller limit
  • Registered ECC design corrects single-bit errors for production stability
  • 2Rx4 rank and 1.1V voltage align with Supermicro H13DSG-OM requirements
  • 288-pin RDIMM form factor fits the motherboard's memory slots precisely

Targeted Server Upgrade

This 1TB kit delivers eight 128GB DDR5 RDIMMs built to the exact specifications of the Supermicro H13DSG-OM motherboard. It targets administrators who need maximum registered ECC capacity on that specific platform without guesswork. The modules arrive new and ready for deployment in compatible enterprise systems.

Build Integration Requirements

Each module uses the 288-pin RDIMM form factor with registered architecture, so the motherboard must support registered DIMMs and the documented population rules for eight modules. The registered design buffers the command bus, allowing all slots to run fully populated at the rated speed. ECC functionality operates automatically on hardware that enables it.

Capacity and Headroom

The kit provides 1TB of total memory at DDR5 4800 with CL40 timing and 1.1V operation. This density suits virtualization hosts, in-memory databases, and compute clusters that benefit from maximum DIMM-per-slot capacity. Systems requiring more than 1TB per CPU socket or speeds beyond 4800MT/s will exceed what this specific kit delivers.

特長

  • 1TB kit enables full server capacity with eight 128GB modules
  • DDR5 4800 speed matches the board's rated memory controller limit
  • Registered ECC design corrects single-bit errors for production stability
  • 2Rx4 rank and 1.1V voltage align with Supermicro H13DSG-OM requirements
  • 288-pin RDIMM form factor fits the motherboard's memory slots precisely

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K8
Capacity1TB (8 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 8X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 4800 MT/s DDR5 kit sustain its rated speed when all eight 128 GB RDIMMs are populated on the Supermicro H13DSG-OM?

The kit is an exact-match upgrade validated for the H13DSG-OM. Registered architecture and 1.1 V operation let the memory controller run every slot at the rated 4800 MT/s without downclocking.

How much heat and power should I expect from a fully populated 1 TB kit running continuously?

Each module draws 1.1 V with no heat spreader, so total power scales with eight 128 GB RDIMMs. Registered buffering reduces controller load, keeping thermals manageable in a server chassis with normal airflow.

Does the Supermicro H13DSG-OM require any specific BIOS setting or DIMM population order for this 8-module kit?

The board's manual defines supported capacities and the required population sequence. Follow that guide to install all eight 288-pin RDIMMs in the correct slots for full 1 TB recognition.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。