暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Sixteen green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 1.5TB DDR5 4800 CL40 16x96GB RDIMM ECC Registered memory upgrade for Supermicro H13DSG-OM

SKU CH-GFKE-8ZMX6

1.5 TB DDR5 kit with sixteen 96 GB registered ECC modules at 4800 MHz CL40 1.1 V for Supermicro H13DSG-OM

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1.5TB 16X96GB

他に 30点の構成を表示
  • 5 TB total capacity from sixteen 96 GB modules for maximum server density
  • DDR5-4800 (PC5-38400) speed with CL40 latency runs at rated frequency
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operating voltage matches platform requirements exactly
  • 288-pin RDIMM form factor verified for Supermicro H13DSG-OM motherboard

1.5TB DDR5-4800 RDIMM kit for Supermicro H13DSG-OM

This 1.5TB kit contains 16 modules of 96GB each, built as 2Rx4 Registered ECC DDR5 RDIMMs. It is designed for the Supermicro H13DSG-OM motherboard, delivering the exact rank, voltage and timing the platform expects for full-capacity operation at rated speed.

288-pin Registered form factor with ECC

The 288-pin RDIMM modules fit the board's memory slots and use registered architecture to offload the memory controller when every slot is populated. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production environments.

1.1V operation at CL40 latency

Running at 1.10V, the kit operates at the standard DDR5-4800 voltage with CL40 timings. Registered buffering maintains signal integrity across all 16 modules at full capacity, supporting stable throughput under sustained server workloads.

特長

  • 5 TB total capacity from sixteen 96 GB modules for maximum server density
  • DDR5-4800 (PC5-38400) speed with CL40 latency runs at rated frequency
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operating voltage matches platform requirements exactly
  • 288-pin RDIMM form factor verified for Supermicro H13DSG-OM motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What DDR5 speed and PC5 rating does this 1.5 TB kit run at?

The kit operates at DDR5 4800 with a PC5 38400 data rate, matching the Supermicro H13DSG-OM memory controller specification.

What physical form factor and pin count must the motherboard slots accept?

Each module is a 288-pin RDIMM, the registered DIMM form factor required by the H13DSG-OM; UDIMM or SODIMM slots will not fit.

In what order should the 16 modules be populated to avoid a no-post condition?

Follow the H13DSG-OM manual's DIMM population sequence exactly; installing all 16 x 96 GB modules in the wrong channel order is the most common cause of boot failure.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。